Catalog on hydraulic spray nozzles - 115 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

  18. P. 90

  19. P. 100

Catalogue excerpts

by taking almost 33 muon moisture from ins Rice and other crops essential to our civilization grc air as they do from their roots. Fog also plays a part in converting grass and fallen leaves fertilizer which then provides fertile soil. Additionally, the reason weaving techniques developed in areas near rivers is that they had the proper humidity necessary for textile production. We would like to make with our own hands the fog that has played such an important role very existence and has been key to the development of society. This desire we for "the marketing of fog" carried out by IKEUCHI. Taking...

 Open the catalogue to page 2

Fine Fog    Fine Drizzle 10-100 |jm    100-300 |jm There are many opinions on the classification of spray droplet sizes but we, “The Fog Engineers”, have classified them as the above.

 Open the catalogue to page 4

Products Lineup Special Nozzles — Self-cleaning flat spray — Air & steam spray — Flat spray with ON/OFF control — Universal-joint type flat spray — Quick-installation nozzles Cone Spray Nozzles Hollow Cone Spray — Extremely fine fog and ultra-small capacity — Semi-fine atomization and small capacity — Small capacity — Medium capacity — Medium capacity / Alumina ceramic — Flange-type, large capacity Full Cone Spray Standard type

 Open the catalogue to page 6

Cone Spray Nozzles Full Cone Spray — Quick-detachable nozzles — Ceramic orifice and whirler inserted type — All alumina ceramic — Small capacity — Flange-type, large capacity — Wide-angle type — Narrow-angle type — Clog-resistant, vaneless nozzles Square Spray Square spray nozzles Special Nozzles — SPILLBACK nozzles for gas cooling — Seven-head type, extremely fine atomization — Seven-head type, standard type Solid Stream Jet Nozzles Solid Stream — Standard solid stream — Convex round inlet solid stream — Paper trimming nozzle Multiple-orifice Solid Stream Multiple-orifice solid stream Special...

 Open the catalogue to page 7

Spray nozzles shown in this catalog are guaranteed to within +/- 5% of the rated spray capacity under the standard pressure. Flat spray and cone spray nozzles shown in this catalog are guaranteed to within +/- 5° of the rated spray angle under the standard pressure. Spray angle is the angle of spray measured near the nozzle unless otherwise specified. Solid stream jet nozzles shown in this catalog are guaranteed for the axis of spray direction within 3° from the nozzle body centerline under the standard pressure. Spray Capacity Tolerance [Note] This guarantee does not cover air nozzles. Air consumption...

 Open the catalogue to page 8

A standard pressure is defined as the design pressure based on the usual liquid pressure during normal use for each nozzle series. Each nozzle is designed to provide the specified spray angle, spray capacity, optimum spray pattern and spray distribution at each standard pressure. The standard pressures are indicated in each table. In addition, IKEUCHI has an original inspection standard for spray pattern and only the nozzles that pass the inspection will be shipped. The figures in this catalog are based on tap water at room temperature and the liquid pressure is measured at the immediate upstream...

 Open the catalogue to page 9

The standard and optional materials available for nozzles are shown in the material table of each nozzle series, using the material codes listed below. As "The Fog Engineers", we, IKEUCHI, have been developing nozzles in a variety of materials to meet the desires and applications of our customers. We were the first to develop ceramic orifice-inserted spray nozzles and succeed in marketing them throughout the world. Listed below are the materials of nozzles and parts, and resistance characteristics of each material against common chemicals. For more information on resistance characteristics, please...

 Open the catalogue to page 10

The photo of spray at the standard pressure -[Spray pattern] [Features] • Flat spray pattern with a mountainshaped spray distribution having gradually tapered edges. • Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. [Applicat ions] Cleaning: Automotives, containers, films, felts, filters, screens, b Dttles, crushed stones, earth and sand, metal parts, n achines, steel plates and pieces Spraying: Etchants, oils, lubricants, liquids, solutions, insecticides, herbicides Cooling: G. s, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire...

 Open the catalogue to page 11

Three-piece StructureStandard Flat Spray Nozzles [Features] • Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. • Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. [Standard Pressure] 0.3 MPa [Applications] Cleaning: Automotives, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water...

 Open the catalogue to page 13

Three-piece Structure Standard Flat Spray Nozzles

 Open the catalogue to page 14

Three-piece Structure Standard Flat Spray Nozzles Flat Spray Please inquire or order for a specific nozzle using this coding system. © Complete nozzle (Example)-1 4MVV11505S303W © Spray tip only (Example)-1 4VV11505S303 Spray Angle Spray Capacity Code    Code Spray Angle Spray Capacity Code    Code S303    ■ W (with Strainer) B    ■ - (without Strainer)

 Open the catalogue to page 15

Standard Flat Spray Nozzles [Features] • Flat spray pattern with a mountainshaped spray distribution having gradually tapered edges. • Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. [Standard Pressure] 0.3 MPa [Applications] Cleaning: Automotives, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, liquids, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection,...

 Open the catalogue to page 16

All H. Ikeuchi & Co., Ltd. catalogues and technical brochures

  1. Fog parasol

    2 Pages

    En
  2. INVVEA

    1 Pages

    En
  3. CRP-AL99

    2 Pages

    En
  4. DDRP

    2 Pages

    En
  5. UZUJP

    1 Pages

    En
  6. TSP

    2 Pages

    En
  7. JJX

    1 Pages

    En
  8. JJHP

    1 Pages

    En
  9. INVV&INJJX

    2 Pages

    En
  10. VVEP-HL

    2 Pages

    En
  11. VVP-stainless

    2 Pages

    En
  12. WVVEP

    2 Pages

    En
  13. Air duster gun

    1 Pages

    En
  14. TAIFU

    2 Pages

    En
  15. CoolPescon

    8 Pages

    En
  16. AW series

    2 Pages

    En
  17. SO-V series

    2 Pages

    En
  18. SLNB series

    2 Pages

    En
  19. BRASINKan®

    4 Pages

    En
  20. COOLKIT B

    1 Pages

    En
  21. COOLKIT A

    1 Pages

    En
  22. COOLKIT series

    1 Pages

    En
  23. Air nozzles

    20 Pages

    En
  24. plastic nozzle

    12 Pages

    En

Archived catalogues