Air nozzles
20Pages

Catalog excerpts

AIR NOZZLES provide solutions for problems in manufacturing plants. There are many areas in which air nozzles can make a difference; including productivity, product quality, cost cutting, noise reduction, and more. IKEUCHI, the Fog Engineers, to meet any customer demand, provides an extensive variety of products, from compact nozzles to entire systems, for applications from narrow spaces to large-scale lines. Usage examples ■Blow-off drying steel surface ■Blow-off drying ■Pinpoint cooling

Open the catalog to page 2

Description for thread size and type (pipe connection size) Threads noted in this catalog are tapered pipe threads (PT) unless otherwise specified. "M" denotes male thread and "F" denotes female thread. ^^^^^^^^^^^^^^^^^^ (Example) 1/4M: 1/4" male taper pipe thread, R1/4 Materials/ ■i.mMii.i.i^MTmmiffETg^ Specifications ABS Acrylonitrile butadiene styrene S303 Stainless steel 303 _. , . , FRPP Glass-fiber reinforced polypropylene S304 Stainless steel 304 •Air consumption (air volume) H HTPVC Heat-treated polyvinyl chloride S316 Stainless steel 316 specified in this catalog is for «3 POM...

Open the catalog to page 3

^IAIFUJet, series The special configuration of takes in surrounding air and boosts powerful air blow. Designed to have a uniform and efficient air blow, <*TAIFUJet~® a^so excels at producing a quiet and solid stream of high impact air. High Spray Impact , uniquely designed to take in surrounding air and multiply air flow, produces a powerful air blow with high spray impact and minimal air consumption. I Low Noise Level (Quiet Operation) have minimal noise levels. Available in Flat type and Round type, depending on your usage. Spray condition Spray direction: Horizontal Measured at 1 m in...

Open the catalog to page 4

Flat Type •Uniform distribution resulting from the unique flat design. •Made of high chemical/heat resistant PPS. •Designed to have minimal noise level. [Spray pattern] Broad type ► Powerful air nozzle dramatically multiplies the supplied air volume. ►Spray width is three times broader than our conventional flat type (42 mm wide). Pipe conn, size Air volume (B/min, Normal) Please inquire or order using this product code. Thread type

Open the catalog to page 5

► Uniform distribution resulting from the unique flat design. ►42 mm wide standard flat air nozzle with 01.0 mm orifice. [Spray pattern] Air volume (fi/min, Normal) Compact type ► Ultra-compact air nozzle (24 mm wide, 30 mm long) with equal high spray impact and minimal noise level. ►Compact enough to install in a narrow space, such as for blow-off [Spray pattern] [B/min, Normal] Pipe conn, size Note: Adhesive is used for assembling of some parts. Please inquire or order for a specific nozzle using this coding system. ©42 mm wide type (D24 mm wide compact type Thread type

Open the catalog to page 6

Flat Type Stainless Steel ►Powerful air nozzle dramatically multiplies the supplied air volume. ►Uniform distribution resulting from the unique flat design. [Spray pattern] ►42 mm wide standard flat air nozzle, available in three orifice diameters: 00.8, 01.0, or 01.2 mm. ► Made of stainless steel with high resistance Pipe conn. ►Compact and wider flat air nozzle, 50 mm wide and 65 mm long. Air volume (G/min, Normal) Please inquire or order for a specific nozzle using this coding system. ©42 mm Wide type <Example> V4M(PT) TF-F 42-16-010 S316L-IN Thread type Orifice diameter code

Open the catalog to page 7

Long Flat Type Stainless Steel ►Long flat type designed for blowing air over greater widths. ►13 spray width types, 100 mm-1,400 mm, are available. ►Space-saving design, suitable for narrow places. ►Air inlet connection at both ends available for size 500 mm and longer, yields more space savings. ►Made of stainless steel with high resistance to shock and heat. [Spray pattern]

Open the catalog to page 8

Round Type ►High impact solid stream of air blown from eight holes. ►Standard round type air nozzle for high-impact, pinpoint blowing. ►Compact design, lightweight. ►Quiet operation with noise level reduced by more than 10 dB (A) compared to conventional one-hole air nozzle. ►For applications which require high spray impact air blow into gaps and narrow spaces (pipes, etc.). Round Type [Spray pattern] Pipe conn. [fi/min, Normal] ► Made of stainless steel S316L with high resistance to shock, heat and chemicals. ►Two pipe connection size types, 1/8M and 1/4M, and five orifice diameter types,...

Open the catalog to page 9

Cluster Header •Header with a cluster of multiple round-type stainless steel air nozzles. •The unit is made of a cluster of nozzles. One cluster can be equipped with 4, 5, or 7 nozzles upon request. •Also available is the multiple-nozzle triple cluster type, consisting of three clusters of multiple-nozzles in one unit, for application of stronger power. ► Header with a cluster of 5 round-type stainless steel air nozzles. Pipe conn, size V4M MT42«I.5 f> JLL @ Pipe conn. size/sF ©Header ©Adaptor • © = 1/4M round-type stainless steel air nozzles • Total air volume = Air volume for 1 pc. of...

Open the catalog to page 10

•Air nozzle with a 42 mm wide even jet. •Blower air nozzles, reducing energy cost to one-third of that for compressed air driven nozzles. •Unique design combining air-amplification, even air blow distribution, [Spray pattern] Pipe conn, size Note: Adhesive is used for assembling of some parts. lAir consumption (B/min,Normal) [B/min, Normal] Please inquire or order using this product code (select material).

Open the catalog to page 11

Round Type »Blower air nozzles, reducing energy cost to one-third of that for compressed air driven nozzles. •Unique design combining air-amplification, even air blow distribution, Round Type ►Air nozzle with pinpoint aim for gaps and narrow spaces. ■Dimensions BAir consumption (fi/min, Normal) [B/min, Normal] lease inquire or order using this product code (select material). <Example> 1/2M TF-BR 6-030 ABS V2M TF-BR 6-030 ABS

Open the catalog to page 12

Long Flat Type •Blower-air driven long, flat type for air blowing over greater widths. •Space-saving design, suitable for narrow places. •Made of plastic resin (PPS nozzle tip and HTPVC pipe header) or Aluminum. •Configured as combinations of 03 mm orifices in 42 mm-wide tip units. Available in lengths of multiples of 42 mm. [Spray pattern] ► Lightweight plastic, long type. MMaterial Material: PPS (nozzle tip), HTPVC (pipe header) ■Operating pressure range Nozzle code: 1M TF-BPF 210^0-030 PPS+HTPVC Air consumption (C/min, Normal) Nozzle code: 2M TF-BPF 630-120-030 PPS+HTPVC Air consumption...

Open the catalog to page 13