Drawer units Drawer units 26 and 35
? = In stock products
These drawer units are attached under a worktable to provide storage space and include either one or two drawers. The drawer cabinet comes with one drawer and a shelf with door. The cabinet can be equipped with manufacturers of casters. The doors and drawers can be locked to protect the contents. More information about locks can be found on page 7.
Drawer units 26 and 35
name size W x D x H inches max load lbs order NoDrawer unit 26/15 10.43 x 17.71 x 5.82 22 860 395-35
Drawer unit 35/15 13.77 x 17.71 x 5.82 22 860 400-35
Drawer unit 26/22 10.43 x 17.71 x 8.66 44 860 060-35
Drawer unit 35/22 13.77 x 17.71 x 8.66 44 860 054-35
Drawer cabinet 35/47 13.77 x 17.71 x 18.50 55 860 972-35
Drawer cabinet 35/47 with1.96 inches casters 13.77 x 17.71 x 21.85 55 860 918-35
Internal drawer dimensions: 8.46/11.81 x 15.74 x 2.75/4.72 inches.
Attachment sets
The attachment set should be selected according to the frame type and depth.
depth 24 (inches) 30 (inches) 36 (inches)Concept worktable 860 931-35
860 930-35
860 239-35
Concept worktable with crank - 860 930-35
-Basic worktable 855 051-35
855 052-35
855 053-35 Attachment set for the TowerLine worktable and Concept motor table (all drawer units) 854 463-35. Not adapted to Concept handcrank table (depth 24 inches).
Drawer units 38
Drawer unit 38 is attached under the worktable. The 38 series drawer uses full extension drawers. Because of its size, drawer unit 38 is suitable for the same uses as drawer unit 26, while offering additional space and load capacity.
20.47 inches 10.23 inches 14.96 inches Drawer units 38
size max load name W x D x H inches lbs/drawer opening % order NoDrawer unit 38/26-1 14.96 x 20.47 x 10.23 132 100 605 35 001
Internal drawer dimensions: 11.81 x 19.68 x 3.54 inches.
Pencil box for drawers 38 and 45
Add a pencil box in the drawer to organize small items more effi ciently.
name for drawer unit 38 for drawer unit 45Pencil box 854 851-35 854 850-35
Attachment sets
The attachment set should be selected according to the frame type and depth.
depth 24 (inches) 30 (inches) 36 (inches)Concept worktable 860 931-35
860 930-35
860 239-35
Basic worktable 855 051-35
855 052-35
855 053-35
6.10 inches Fastening set for the TowerLine worktable and Concept motor table (all drawer units) 854 463-35. Not adapted to Concept handcrank table.
11.41/14.37 inches 48 www.sovella.us