T-Paste 70-2 - Low Density Epoxy Tooling Paste (v2) - Gurit - #6

Text version of the page

6 PDS-T-Paste 70-2 -2-0211 Transport & Storage T-Paste 70-2 should be kept in securely closed containers during transport and storage. Any accidental spillage should be soaked up with sand, sawdust, cotton waste or any other absorbent material. The area should then be washed clean. (See appropriate Safety Data Sheet). The shelf life is 12 months from date of manufacture for both Resin and Hardener. Ideally, storage should be in a warm dry place out of direct sunlight. The temperature should be between 18°C and 25°C. Containers should be firmly closed, as the hardener in particular will suffer serious degradation if left exposed to the air. Notice SP-High Modulus is the marine business of Gurit (the company). All advice, instruction or recommendation is given in good faith but the Company only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/termsandconditions_en.html. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure that they are suitable for the Customer’s planned application. Such testing should include testing under conditions as close as possible to those to which the final component may be subjected. The Company specifically excludes any warranty of fitness for purpose of the goods other than as set out in writing by the Company. The Company reserves the right to change specifications and prices without notice and Customers should satisfy themselves that information relied on by the Customer is that which is currently published by the Company on its website. Any queries may be addressed to the Technical Services Department. Gurit are continuously reviewing and updating literature. Please ensure that you have the current version, by contacting Gurit Marketing Communications or your sales contact and quoting the revision number in the bottom right-hand corner of this page. UK St Cross Business Park Newport, Isle of Wight United Kingdom PO30 5WU T +44 (0) 1983 828 000 F +44 (0) 1983 828 100 E marine@gurit.com W www.gurit.com Australia Unit 1A / 81 Bassett Street, Mona Vale, 2103 NSW, Australia T +61 (0) 2 9979 7248 F +61 (0) 2 9979 6378 E sales-au@gurit.com W www.gurit.com New Zealand 32 Canaveral Drive, Albany, Private Box 302-191, North Harbour, 0751 Auckland, New Zealand T +64 (0) 9 415 6262 F +64 (0) 9 415 7262 W www.gurit.com Canada 175 rue Péladeau, Magog, (Québec) J1X 5G9, Canada T +1 819 847 2182 F +1 819 847 2572 E info-na@gurit.com W www.gurit.com