Spabond 340 - Epoxy Adhesive System (v8) - Gurit - #7

Text version of the page

PDSWE-Spabond 340-8-0208 7 Gurit (Canada) Inc 175 rue Péladeau, Magog, (Québec) J1X 5G9, Canada T +1 819 847 2182 F +1 819 847 2572 E info-na@gurit.com W www.gurit.com Gurit (Kassel) GmbH Otto-Hahn-Strasse 5 D-34123 Kassel Germany T +49 (0) 561 99 85 63-0 F +49 (0) 561 99 85 63-22 W www.gurit.com Gurit (Spain) SA Polígono Industrial Romica C/K, Parc.11c 02080 - Albacete Spain T +34 967 254 507 F +34 967 254 005 W www.gurit.com Gurit (Tianjin) Composite Materials Co., Ltd. Hengtong Road, YSP. TEDA. Tianjin. P.R. China T +86 22 8210 6850 F +86 22 8210 8622 W www.gurit.com Gurit (UK) Ltd St Cross Business Park Newport, Isle of Wight United Kingdom PO30 5WU T +44 (0) 1983 828 000 F +44 (0) 1983 828 100 E info-uk@gurit.com W www.gurit.com Transport & Storage The resin and hardeners should be kept in securely closed containers during transport and storage. Any accidental spillage should be soaked up with sand, sawdust, cotton waste or any other absorbent material. The area should then be washed clean (see appropriate Safety Data Sheet). Adequate long term storage conditions will result in a shelf life of two years for both the resin and hardeners. Storage should be in a warm dry place out of direct sunlight and protected from frost. The temperature should be between 10°C and 25°C. Containers should be firmly closed. Hardeners, in particular, will suffer serious degradation if left exposed to air. Notice All advice, instruction or recommendation is given in good faith but Gurit AG (the company) only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/termsandconditions_en.html. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure that they are suitable for the Customer’s planned application. Such testing should include testing under conditions as close as possible to those to which the final component may be subjected. The Company specifically excludes any warranty of fitness for purpose of the goods other than as set out in writing by the Company. The Company reserves the right to change specifications and prices without notice and Customers should satisfy themselves that information relied on by the Customer is that which is currently published by the Company on its website. Any queries may be addressed to the Technical Services Department. Gurit are continuously reviewing and updating literature. Please ensure that you have the current version, by contacting Gurit Marketing Communications or your sales contact and quoting the revision number in the bottom right-hand corner of this page.