Catalogs >
Gurit >
RENUVO Finishing System (FS) v1

RENUVO Finishing System (FS) v1
3Pages

Catalog excerpts

FS Finishing System n UV curing single component surface filler n Ideally suited for filling surface defects and finishing repairs n Up to 5 minutes working time in direct sunlight n Working conditions from +5°C up to +30°C n Cure with RENUVO™ Neolectron lamp n Cure thickness of up to 3mm is achievable n Supplied in a user friendly 310ml cartridge format n Compatible with current topcoat solutions Introduction RENUVO™ Finishing System (FS) can be used for small surface defects and finishing of structural repairs and can be used in conjunction with other RENUVO™ products. Supplied in a cartridge, as a single component system, RENUVO™ FS shares many of the handling and cure characteristics of RENUVO™ Multi-Purpose System (MPS), but with the added advantages of being easy to sand and can be used in direct sunlight, with working times of up to 5 minutes. PDSWE-RENUVO FS-1-1012 1

Open the catalog to page 1

Properties Recommended Ambient Conditions Temperature ( C) Transport and Storage +5 to +30 o Maximum Relative Humidity (%) Shelf-life @ 23oC (months) TBD 90 Shelf-life @ -18 C (months) TBD o Product should be protected from any UV exposure in order to maximise shelf-life. Uncured MPS Properties Handling 1.2 Density @ 21 C (g/cm ) 3 o Outdoor Working Time in High UV (s) 330 105 Viscosity @ 25 C (P) o Cure Time@300mW/cm (min)* 3 Cure Height@300mW/cm2 (mm)* 30 2 Adhesion Performance (ISO 4624/16276) Adhesion to RENUVO prepreg (MPa) *Please refer to RENUVO™ Lamp datasheet for more info. 9 @ 90%...

Open the catalog to page 2

Transport & Storage The RENUVO™ FS cartridges and caps should be kept securely closed during transport and storage. Storage should be in a dry place out of direct sunlight, ambient light and protected from frost. The long-term storage temperature should be between 10°C and 25°C, the product may however be stored between +5°C and 30°C prior to application. It is recommended that cartridges are stored in their original box to protect the cartridges from ambient UV light. Notice All advice, instruction or recommendation is given in good faith but Gurit AG (the company) only warrants that...

Open the catalog to page 3