video corpo

Gurit® Corecell M - The Marine Foam (v6)
2Pages

{{requestButtons}}

Catalog excerpts

Gurit® Corecell M - The Marine Foam (v6) - 1

Corecell™ The Marine Foam n Replacement for PVC cores n High shear strength combined with low density n High temperature processing (prepreg compatible) n High elongation for toughness n Suitable for all composite processes including prepreg n Benefits from GL, DNV, RINA and ABS certification Introduction Corecell M-Foam is the newest addition to the Corecell range and shares the benefits of SAN chemistry common to all Corecell products. Environmental stability – High tolerance for heat and chemical exposure Built in toughness – High ductility and damage tolerance compared to cross-linked PVC and Balsa Fine cell size – Resin absorption is very low, saving both weight and cost Superior uniformity – Low density variation Eliminating outgassing – Corecell eliminates the problems of foam outgassing Compatibility – Suitable for use with all polyester, vinylester and epoxy resins No inhibition - Corecell does not inhibit any epoxy resin curing mechanisms Handling – Tough and easy to machine Corecell M-Foam has been developed to deliver one product for all Marine applications. It provides a combination of high shear strength with low density, high elongation, high temperature resistance and low resin uptake. M-Foam is the perfect choice whether your application is slamming area or superstructure, hull or deck, using hand lamination, infusion or prepreg. If looking for reliable processing, M-Foam delivers through the benefits recognised in all Corecell products of fine cell size and unique knife-cuts giving low resin uptake in infusion processes. For prepreg, M-Foam offers high temperature resistance to allow shorter cure cycles and the confidence to process without fear of inhibition of prepreg catalysis. Where static properties are important, M-Foam delivers high shear strength at a low density. Where dynamic performance is crucial, the high elongation delivers higher useful properties and the toughness to give impact resistance and superior fatigue performance. Corecell M-Foam is available in resin infusion format and is compatible with polyester, vinylester and epoxy resin systems. The low resin absorption characteristics of Corecell and it’s unique knife cut formats deliver higher performing infusions, low resin cost and low weight. Gurit’s global technical team have 10 years experience in resin infusion, hand lamination and prepreg processing and offer on-site support and structural engineering for Corecell customers. This combination makes Corecell a key part of a reliable package. PDS-Corecell M-Foam-5-0610 1

Open the catalog to page 1
Gurit® Corecell M - The Marine Foam (v6) - 2

Please Note: Data quoted is average data at each product s nominal density, and is derived from our regular testing of production materials Statistically derived minimum value data, satisfying the design requirements of various classification societies, is available on All advice, instruction or recommendation is given in good faith but Gurit AG (the company) only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are...

Open the catalog to page 2

All Gurit catalogs and technical brochures

  1. PREPREGS

    11 Pages

  2. RA320H5

    1 Pages

  3. XA450

    1 Pages

  4. UT-EA661

    1 Pages

  5. REA390S

    1 Pages

  6. PB1000

    2 Pages

  7. UT-E1200

    1 Pages

  8. UT-E800

    1 Pages

  9. UT-E500

    1 Pages

  10. UT-E250

    1 Pages

Archived catalogs