video corpo

General Datasheet PN 901
4Pages

{{requestButtons}}

Catalog excerpts

General Datasheet PN 901 - 1

General Datasheet PN 901 300°C TG CYANATE ESTER PREPREG ¬ Achieves a Tg > 200°C (392ºF) after a cure temperature of 135-180°C (275-356ºF) Achieves a Tg > 300°C (573ºF) after a post-cure of 180-300°C (356-573ºF) Ideal for components exposed to high temperatures for short durations Good mechanical properties within large temperature range Low moisture absorption with high temperature wet performance Self-extinguishing and low smoke emission Easy handling and drape-ability (good tack life) Long shelf and shop life INTRODUCTION PN 901 is an ideal prepreg resin for high temperature composite applications, as it combines the ease of processing and handling convenience of epoxy resins, high temperature stability of polyimides, and flame and fire resistance of phenolics. A 120°C (248ºF) cure for 75 minutes combined with a post-cure, enables PN 901 to generate a Tg of up to 300⁰C (572ºF), making PN 901 ideal for applications in composite structures, which are exposed to very high temperatures for short durations. The flame and smoke characteristics of PN 901 composites show that this resin possesses superior flame retardant properties and holds a wide range of Aerospace grade FST (Fire/Smoke/Toxicity) standards.

Open the catalog to page 1
General Datasheet PN 901 - 2

PRODUCT INFORMATION PN 901 is available as prepreg resin matrix in unidirectional tapes and fabric prepregs with various types of fibres. Please consult your local sales contact for further information. Full contact details can be found at www.gurit.com. PREPREG PROPERTIES TRANSPORT & STORAGE When stored sealed & out of direct sunlight. STORAGE TEMP All prepreg materials should be stored in a freezer when not in use to maximise their useable life, since the low temperature reduces the reaction of resin and catalyst to virtually zero. However, even at -18°C (0ºF), the temperature of most...

Open the catalog to page 2
General Datasheet PN 901 - 3

LAMINATE PROPERTIES ILSS PERFORMANCE WITH TEMPERATURE Autoclave cured laminate evaluated for ILSS performance over a range of temperatures. TEST TEMPERATURE 8 x PN 901 296GSM 8HS E-GLASS WITH 40% RESIN CONTENT TEST STANDARD ILSS PERFORMANCE AFTER 230°C TEMPERATURE EXPOSURE Autoclave cured laminate evaluated for ILSS performance following 230°C heat exposure for increasing lengths of time (tested at 23°C). TEST TEMPERATURE 8 x PN 901 296GSM 8HS E-GLASS WITH 40% RESIN CONTENT TEST STANDARD ILSS after 360 hours @ 230°C ILSS after 500 hours @ 230°C ILSS after 1000 hours @ 230°C ILSS PERFORMANCE...

Open the catalog to page 3
General Datasheet PN 901 - 4

NOTICE All advice, instruction or recommendation is given in good faith but the Company only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/terms-and-conditions.aspx. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure...

Open the catalog to page 4

All Gurit catalogs and technical brochures

  1. PREPREGS

    11 Pages

  2. RA320H5

    1 Pages

  3. XA450

    1 Pages

  4. UT-EA661

    1 Pages

  5. REA390S

    1 Pages

  6. PB1000

    2 Pages

  7. UT-E1200

    1 Pages

  8. UT-E800

    1 Pages

  9. UT-E500

    1 Pages

  10. UT-E250

    1 Pages

Archived catalogs