|
|
See other catalogues for GSR Ventiltechnik
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 00Q | Baureihe 40TM - Type 40TM | | | | | 2/2 - Wege Magneiventil | | | | | | | | | | | Ventiltechnik | | | | | | | | | | | | | | | | | | Standardtype Ventil in Ruhestellung geschlossen - (NC). Bei erregtem Magnet baut sich die Druckdifferenz von der Sekundärseite der Membrane über die Servobohrung ab. Die wirksame Druckdifferenz hebt die Membrane vom Ventilsitz ab. Der angegebene Mindestdruck muß als Druckdifferenz immer vorhanden sein. Standard type Valve normally closed - NC. When energised, the pressure decomposes on the secondary side of the diaphragm. Then the pressure differential (Ap) lifts the diaphragm from the seat (orifice). A pressure (Ap) is necessary for accurate operation. | | | | | | | | | | | | | | | | | | | Steuerungsart: | Servogesteuert | Metall. Innenteile: | Messing und Edelstahl 1.4104 | | | | Type of control: | Pilot operated | Metallic internals: | Brass and stainless steel (AISI 430F) | | | | Konstruktion: | Sitzventil mit Membrandichtung | Dichtung: | EPDM | | | | Construction: | Diaphragm design | Sealing: | EPDM | | | | Anschluß: | G1/4-G2, DIN ISO 228 | Einbaulage: | beliebig, Magnet vorzugsweise stehend | | | | Connection: | G1/4-G2, DIN ISO 228 | Installation: | actuator in any position, preferable upright | | | | Druck: | 0,3-20 bar (s. Tabelle) | Anschlußspannung: | AC: 24,42,110,230V 50Hz | | | | Pressure: | 0,3-20 bar (see table) | Supply voltage: | DC: 24,110,196V= | | | | Durchflußmedium: | Neutrale, gasförmige u. flüssige Medien | Spannungstoleranz: | +5%/-10% | | | | Medium: | Neutral, gaseous and liquid medium | Voltage tolerance: | +5%/-10% | | | | Viskosität: | 22mm2/s | Leistungsaufnahme: | T012 =18,5 Watt | | | | Viscosity: | 22mm2/s | Power-consumption: | T012 =18,5 Watt | | | | Mediumtemperatur: | -10 bis +130°C | Schutzart: | IP65 nach DIN 40050 | | | | Medium temperature: | -10 up to +130°C | Protection class: | IP65 according to DIN 40050 | | | | Umgebungstemperatur: | +35°C | Einschaltdauer: | 100% ED-VDE 0580 | | | | Ambient temperature: | +35°C | Duty factor: | 100% ED-VDE 0580 | | | | Ventilgehäuse: | ../10../.. = Messing / Brass | Kabelanschluß: | Gerätestecker DIN 43650 | | | | Body material: | ../08../.. = Edelst.1.4581 / St. steel (AISI 316Ti) | Cable connection: | DIN 43650 - plug | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DN | Sitz | Kv-Wert | Standardtype | max. Druck bei Magnettype / max. pressure reg. solen. type | | | | | Orifice | Flow-rate | Standard type | | | | | | G | 0mm | m3/h | | T012-TM | T012-NT (NO + TM) | | | | 1/4 | 13,5 | 1,6 | D4021/1006/.... | 0,3-20 | 0,3-16 | | | | 3/8 | 13,5 | 3,3 | D4022/1006/.... | 0,3-20 | 0,3-16 | | | | 1/2 | 13,5 | 3,8 | D4023/1006/.... | 0,3-20 | 0,3-16 | | | | 3/4 | 27,5 | 11,0 | D4024/1006/.... | 0,3-20 | 0,3-16 | | | | 1 | 27,5 | 13,0 | D4025/1006/.... | 0,3-20 | 0,3-16 | | | | 5/4 | 40 | 30,0 | B4026/1006/.... | 0,5-16 | 0,5-10 | | | | 6/4 | 40 | 32,0 | B4027/1006/.... | 0,5-16 | 0,5-10 | | | | 2 | 50 | 45,0 | B4028/1006/.... | 0,5-16 | 0,5-10 | | | | Edelstahl 1.4581/Stainless steel 1.4581 (AISI 316 Ti) | | | | 1/4 | 13 | 1,6 | D4021/0806/.... | 0,3-20 | 0,3-16 | | | | 3/8 | 13 | 3,3 | D4022/0806/.... | 0,3-20 | 0,3-16 | | | | 1/2 | 13 | 3,8 | D4023/0806/.... | 0,3-20 | 0,3-16 | | | | 3/4 | 25 | 11,0 | D4024/0806/.... | 0,3-20 | 0,3-16 | | | | 1 | 25 | 13,0 | D4025/0806/.... | 0,3-20 | 0,3-16 | | | | 5/4 | 40 | 30,0 | B4026/0806/.... | 0,5-16 | 0,5-10 | | | | 6/4 | 40 | 32,0 | B4027/0806/.... | 0,5-16 | 0,5-10 | | | | 2 | 50 | 45,0 | B4028/0806/.... | 0,5-16 | 0,5-10 | | | | | | | | | | | | | | | | | | | | | Stand/State: 06/2008 GSR-MK-JM-DB40TM Irrtum und Änderungen vorbehalten - Errors excepted, subject to change! | | | | | | | | | | | | | | | | | | | | |
|
