XL 3210II - GRADALL industries Inc - #1

XL 3210n

INDUSTRIAL MAINTENANCE MACHINE

SPECIFICATIONS

Hoist........................4,500 psi (31,034 kPa)

Tilt.............................2,050 psi (14,138 kPa)

Swing.......................3,300 psi (22,759 kPa)

Tool...........................4,500 psi (31,034 kPa)

Telescope...............4,500 psi (31,034 kPa)

Crawler...................4,800 psi (33,103 kPa)

Pilot System..............500 psi (3,448 kPa)

Reseivoir 35 gallons (133 L), system 50 gallons (189 L). Pressurized reseivoir with visual oil level gauges.

10 micron return filter with magnet and 100 mesh suction strainer In reseivoir.

Fin and tube-type oil cooler with thermal by-pass and relief valves.

Pressure-compensated, load-sensing valves with circuit reliefs in all circuits.

Tractor type crawler with triple grouser heavy-duty pads.

Sealed track links, lubricated and sealed Idlers and rollers, hydraulic track tension adjustment, track guides, motor and hose guards, front and rear tow eyes.

11'8" (3.5m) Track pads:

19.7" (500mm) or 23.6" (600mm) Crawler width:

8 2" (2.5m) w/19.7" (500mm) pads 8' 6" (2.6m) w/23.6" (600mm) pads Ground clearance:

18" (457mm)

Two hydraulic joysticks (hoist & bucket, telescope & swing), one rocker switch (tilt) control upperstructure. Hydraulic joysticks are mounted on arm pods that are adjustable for Individual operator comfort and convenience.

Two hydraulically damped foot pedals (with handles) control crawler steering, travel and brakes. Toggle switch on arm pod for selection of crawler speed range.

Joysticks are self-centering; when the controls are released, power for movement disengages and swing, tilt and crawler brakes set automatically.

Key operated Ignition/starter switch, throttle, hour meter and air cleaner condition Indicator. Electronic monitor Indicates fuel level, low battery charge, coolant level, hydraulic oil level, lube oil pressure, high coolant temperature, and engine rpm. Fuel saving auto idle feature sends engine rpm to idle when control circuits are in neutral for seven seconds.

Deere 4045T diesel, turbocharged, liquid cooled, 4 cycle, 4 cylinder, 276 cid (4.5 L) 4.19" bore x 5.00" stroke (106 mm x 127 mm) 170:1 compression ratio

114 hp (85 kW) gross at 2200 rpm, 108 hp (81 kW) net at 2200 rpm. 329 ft.-lb. (446 Nm) gross torque at 1500 rpm.

Altitude capability: 10,000' (3048m). Derate 4% per 1,000' (305m) above 10,000' (3048m).

Maximum slope: 45°

12 volt starter, 105 amp alternator, one SAE #C31-S 810 CCA battery, two-stage dry type air cleaner with centrifugal precleaner and safety element. Evacuator valve and service Indicator, spin-on oil filter, spin-on fuel filter/water separator.

Fuel tank capacity: 57 gallons (215L).

One load-sensing, axial piston pump; oil flow 0-75 GPM (0-283 L/min).

Electronic monitor In cab Indicates low hydraulic fluid level, high hydraulic fluid temperature, and condition of hydraulic suction and return filters.

• 2 boom hoist: 4.25" ID, 3.0" rod (108mm x 76mm), 23.4" (594mm) stroke.

• 1 tool: 4.75" ID, 3.0" rod (121mm x 76mm), 18.9" (480mm) stroke.

• 1 telescope: 3.5" ID, 2.559" rod (89mm x 65mm), 11' (3.34 m) stroke.

Swing, 51Hp (38 kW); tilt, 18 Hp (13kW); two crawler drives, 93 Hp (69 kW) each.

Priority swing circuit with axial piston motor Planetary transmission.

Swing Speed: 9.5 rpm.

Automatic spring-set/hydraulic release wet disc parking brake. Dynamic braking Is provided by the hydraulic system.

All-weather cab with tinted safely glass win­dows, skylight, acoustical lining, four-way adjustable operators seat, filtered fresh air heater and defroster. Front window slides to overhead storage. Rear view mirrors on right and left sides of the machine.