XL 3100III-RR - GRADALL industries Inc - #1

/ 4


catalogue search
XL 3100III-RR - GRADALL industries Inc
P. 01
XL 3100III-RR - GRADALL industries Inc
P. 02
XL 3100III-RR - GRADALL industries Inc
P. 03
XL 3100III-RR - GRADALL industries Inc
P. 04
Pages:
XL 3100III-RR - GRADALL industries Inc


See other catalogues for GRADALL industries Inc
You may also be interested in

Scaler, Crawler excavator, Excavator, Wheel excavator


Text version of the page
XL 3100m
SPECIFICATIONS
Undercarriag
Steering:
Ross, integral hydraulic power steering. Gear type power steering pump. 4-quart power steering reservoir with filter
Standard chassis equipment:
Halogen headlights, tail lights, back-up lights and alarm, stoplights, identification lights front and rear, directional lights, 4-way hazard lights, and instrument panel lights. Windshield wiper/washer, wheel wrenches, West Coast style mirror system with plane and convex mirrors, front and rear tow hooks, desiccant type air dryer with automatic purge valve and thermostatically controlled heater.
Pressure-compensated, load-sensing valves with circuit reliefs in all circuits.
4 x 2 or 4 x 4 Wheelbase: 156" (3.96m) Width 102" (2.6m)
Frame:
48" (1.2m) wide, welded plate design 65 ksi material
Gross vehicle axle weight rating:
4 x 2 41,000 lb (18,597 kg)
4 x 4 44,000 lb (19,958 kg)
Front axles:
4 x 2: Meritor Model MFS-16-122A, 16,000 lb (7,257 kg) rating
4 x 4: Meritor Model RF16-145, 16,000 lb (7,258 kg) rating, 7.17 ratio
Rear axle:
Meritor Model RS25-160, 25,000 lb (11,340 kg) rating. 717 ratio, single reduction with driver controlled differential lock.
Suspension:
Front: 8 leaf spring with automatic lock-out cylinders Rear: Solid mount
Brakes:
4 x 2 Front: Meritor "Q" Series Cam-Master Size: 16.5" x 5" (419 mm x 152 mm) Automatic Slack Adjusters
4 x 4 Front: Meritor "Q" Series Cam-Master Size: 16.5" x 6" (419 mm x 127 mm) Automatic Slack Adjusters
4 x 4 Rear and 4 x 2 Rear: Meritor "P" Series Cam-Master Size: 16.5" x 7" (419 mm x 178 mm) Automatic Slack Adjusters
Spring brake system incorporates emergency and parking brakes on the rear axle.
Wheels:
Hub piloted disc 10-stud, 11.25" (286 mm) bolt circle.
Tires:
4 x 4 front: 425/65R22.5 20-ply
4 x 2 front: 385/65R22.5 18-ply on/off
highway tread
4 x 2 and 4 x 4 rear: 11R24.5 16-ply highway deep tread
4 x 4 optional front and rear: 445/65R22.5 20-ply on/off highway tread (Note: 445/65R22.5 tires are not intended for prolonged highway use at speeds above 50 mph.
Chassis Cab
One-person cab, left-hand mount, isolated from frame on rubber mounts. Acoustical lining. Sun visor. Gauges for oil pressure, coolant temperature, air tank pressures, fuel level, voltmeter, speedometer with odometer, tachometer, hour meter Engine monitor lights. Engine shutdown controlled by engine electronics. Indicator lights and controls for front axle engagement (4 x 4 only) and rear axle differential lock. Park brake control. Tinted safety glass. Sliding side windows. Fresh air heater and defroster. Dome light. Air suspension seat with seat belt. Vent in door
ydraulic System
PUMPS
One load-sensing axial piston pump; 8-55 GPM
(30-208 L/min) total.
1 Gear Pump 11GPM (42L/min)
SYSTEM SPECIFICATIONS
Four double acting cylinders:
• 2 hoist cylinders: 3.5" x 2.56"
Rod x 31" stroke89mm x 65mm x 787mm
• 1 tool cylinder: 4.25" Borex 3.0" Rod x 25.9 stroke(108mm x 76 x 658)
• 1 telescope: 3.5" ID, 2.559" Rod(89mm x 65mm), 11'(3.34m) stroke
Four hydraulic motors: Swing, 51 Hp (38kW); tilt, 21 Hp (16kW); two remote drive, 88 Hp (65kW) total. Operating pressures:
Upperstructure Cab
All-weather cab isolated from frame on rubber mounts. Tinted safety glass windows, skylight, acoustical lining, four-way adjustable operator's seat, dome light, filtered air heater and defroster. AM/FMRadio, Air-Conditioning work light package.
The heat source is provided by a fast response, closed circuit hydraulic heater with 20,000 BTU/Hr. capacity
Front window slides to overhead storage. Rearview mirrors on right and left sides of the machine. Windshield wiper and washer.
Hoist ...........
. . .4,800
psi (331 bar)
Tilt..............
. . .2,500
psi (172)
Swing ..........
. . .3,000
psi (206)
Tool ............
. . .4,800
psi (331)
Telescope ......
. . .4,800
psi (331)
Remote Propel . .
. . .3,750
psi (258 bar)
Pilot system
550
psi (38 bar)
Hydraulic Remote Control
Undercarriage powered by upperstructure hydraulics through hydraulic motors and PTOs on transmission. Travel and steering pedals in upperstructure cab. Digging brakes and front axle lockout cylinders set automatically with travel pedal in neutral. Parking brakes controlled by toggle.
Electrically operated alarm mounted on undercarriage signal remote control movement in either direction, reverse movement when driven from undercarriage cab.
Oil capacity:
Reservoir 35 gallons (133 U, system 50 gallons (189 L). Pressurized reservoir with visual oil level gauges.
Filtration system:
10 micron return filter with magnet. 10 micron pilot filter Fin and tube-type oil cooler with thermostatically controlled cooling fan.

pageCatalog pdf di En 2012-02-07-14