Text version of the page

B3AB2

AquaBoost II Product Bulletin-3AB2 - B3AB2 - 14176 ITT

Residential & Commercial Water Systems

Goulds Pumps

AquaBoost™ II

3AB2

Variable Speed Constant Pressure Pump Controller 3AB2 (3 HP) CONTROLLER FEATURES

Input Power — 196-264 Volts, single phase 2 wire, groundedOutput Power — Up to 230V three phase (based on input voltage). Motor rated for 208-230 V.Maximum Full Load Current — 10.9 Amps Input Controls — Press and hold pressure increase/decrease buttons. Min. speed & motor overload switch.Signal Light — Power on, pump running, pump stopped, faults/errors.Electrical Efficiency — Over 95% Protection Against — Short circuit, under voltage, motor overload, motor temperature, dead heading, run out, suction loss, sensor fault, bound pump, over voltage, over/under temperature.Ambient Temperature — 0º F to 122º F Maximum Humidity — 95% at 122º F, non-condensingAir Pollution — Avoid mounting in areas with excessive dust, acids, corrosives and salts.Controller Enclosure — NEMA 3R (Rain-tight) Mounting — Wall mount (mounting screws included). Cooling — Convection with heat sink and fan. Transducer — 0.5 - 4.5 VDC with 5 VDC power supply, 80 psi range, 80" 3-wire cable. Low input voltage will affect motor operation.
Goulds Pumps is a brand of ITT Corporation.www.goulds.com Always size 3 phase motor based on max. amps.

Engineered for life