See other catalogues for
GMT
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | GMT - Air springs | | |
| | | |
| | | Item no.: 106001 Vertical load: minimum (recommended): 50 kg maximum allowance: 200 kg Stiffness [N/mm]: | | |
| | | Natural frequency/ load diagram | | |
| | | |
| | | -1.4 | | |
| | | |
| | | |
| | | | | | | | | | | vertical | horizontal | Pressure | | | | - | 90 | 0 bar | | | | 50 | | 1,4 bar | | | | 60 | | 2,6 bar | | | | 70 | | 5,7 bar | | | | | | | | | | |
| | | -2,6 | | |
| | | |
| | | -3,7 J -45 -5,7 | | |
| | | |
| | | |
| | | 50 | | 100 150 Load range | | 200 250 300 Load (kg) | | |
| | | |
| | | |
| | | |
| | | Item no.: 106002 Vertical load: minimum (recommended): 200 kg maximum allowance: 1000 kg Stiffness [N/mm]: | | |
| | | Natural frequency/ load diagram | | |
| | | |
| | | | | |
| | 1.0 | | |
| | | |
| | | |
| | 2,0 | | |
| | | | | | | | | | | vertical | horizontal | Pressure | | | | - | ~425 | 0 bar | | | | 290 | | 1,1 bar | | | | 310 | | 3,1 bar | | | | 400 | | 6 bar | | | | | | | | | | |
| | | |
| | ■3,0 ■Aß 1 5.0 » '6fl | | |
| | | co o CD > | | | |
| | | |
| | | 200 400 600 | | |
| | | 800 1000 1200 Load (kg) =~ | | |
| | | |
| | | |
| | | |
| | | Load range | | |
| | | |
| | | Natural frequency/ load diagram | | |
| | | Item no.: 106003 | | |
| | | |
| | | |
| | | Vertical load: minimum (recommended): 1000 kg maximum allowance: 5000 kg Stiffness [N/mm]: | | |
| | | I 6 | | |
| | | |
| | | |
| | | ■ZA | | | | | | | | | | vertical | horizontal | Pressure | | | | - | 2000 | 0 bar | | | | 1200 | | 1,3 bar | | | | 1420 | | 3,5 bar | | | | 1800 | | 5,6 bar | | | | | | | | | | |
| | | |
| | | to "S c | | |
| | | 3,5 4,5 I +-5,6 | | |
| | | |
| | | |
| | | co o "t CD > | | |
| | | |
| | | |
| | | 1000 2 000 3 000 4 000 5 000 6 000 Load (kg) <=- | | |
| | | |
| | | -! | | |
| | | Load range | | |
| | | |
| | | |
| | | There is a possible deviation of approx. +/-20% in the above values due to production and hardness tolerances. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |