Text version of the page

DIMENSIONS V1

NOTE: WITH INLET AT PORT A , SHAFT ROTATION IS CLOCKWISE LOOKING ON SHAFT. FOR OPPOSITE ROTATION REVERSE PORTS.

PERFORMANCE V1

0 - 0.6 HP/0.44 kW REVERSIBLE

GRAPH 1 TORQUE - SPEED GRAPH 2 GRAPH 2 STARTING TORQUE - PRESSURE STARTING TORQUE - PRESSURE 654321 PRESSURE bar 6 BAR 4 BAR MAXIMUM STARTING TORQUE TORQUE Nm. 30 PS405060 PSI708090 PSI100 MINIMUM STARTING TORQUE 0.4
TORQUE (inch lbs.) TORQUE (inch lbs.)TORQUE Nm. 2 BAR 02468100.20.40.60.81.01.212 02468100.20.60.81.01.212 1000 2000300040005000 6000 10 2030405060708090100
SPEED revs per min. PRESSURE P.S.I. GRAPH 3 POWER - SPEED GRAPH 4 CONSUMPTION - SPEED 6 BAR 100 90 PSI 4 BAR6 BAR 100 90 PSI 4 BAR 80 60 PSI.7080 70 50 60 PSI HORSE POWER POWER (WATTS) 40 2 BAR 50 40 2 BAR 30 PSI 30 PSI 00.10.20.30.40.51002003004000.6 1000 20003000400050006000
AIR CONSUMPTION cu.ft/min. free air litres/sec. free air 05101520252468101230 1000 20003000400050006000
SPEED revs per min. SPEED revs per min.

Attitude: Polar Moment of Inertia:

The motor can be operated in all positions. 0.16 lb.ins2 (460 g.cm2).

Airline filtration and lubrication: Maximum overhung force on shaft:

Use 64 micron filtration or better. Choose a lubricator suitable forthe flow required. Prior to start up, inject oil into the inlet port. 4 lbf (18N) Axial loads should be kept to a minimum. Consult your Globe Distributor.

Lubricator drop rate: Maximum temperatures:

4-5 drops per minute continuous operation. 9-12 drops per minute intermittent operation. -4°to +176°Farenheit. (-20°to +80°C )Muffler supplied with motor. 9