Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | Today, the principle of air-cooling belongs to international shipbuilding standards when starting-industrial air compressors of smaller performance are concerned. Already in the 50ies, Sauer started with the development of air-cooled compressors manufacturer in this performance range as an alternative to the water-cooled ones which are maintenance-intensive and more susceptible to failures. Today, after having been completely redesigned, the 2-stage air-cooled starting-air compressors of Sauer & Sohn count among the most modern and maintenance-friendly compressors available world-wide. If you require references, please do not hesitate to contact us! | | | | | | | | | | Technical Data | | | | | | | | | | 2-stage air-cooled starting-air compressors | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Technical Data for a final pressure of 30 bar | | Dimensions | | | | Type | Ta" | Stages | Cylinder | | | conation | | Weight kg | Length mm | Wmidmth | Height mm | | | | WP 15 L | 40 | 2 | 2 | 1150 | ¡55 ¡8? | 2,7 | 3,0 | 120 | 812 | 600 | 630 | | | | | | | | 1750 | 3,4 4,1 | 3,7 4,5 | | | | | | | | WP 22 L | 40 | 2 | 2 | 1150 | 2!J 25,3 | 3,5 | 3,9 | 135 | 852 | 600 | 630 | | | | | | | | 1450 | 4,4 | 4,8 | | | | | | | | | | | | 1750 | 5,4 | 5,9 | | | | | | | | WP 33 L | 35 | 2 | 2 | 1150 | 38,6 | 5,1 | 5,6 | 145 | 860 | 600 | 630 | | | | | | | | 1750 | 6,5 7,8 | 7,1 8,6 | | | | | | | | WP 45 L | 40 | 2 | 2 | 1170 | 566 6o,o | 7,6 | 8,4 | 310 | 1210 | 745 | 820 | | | | | | | | 1470 1770 | 9,6 11,5 | 1102,,66 | | | | | | | | WP 65 L | 40 | 2 | 2 | 1170 1470 1770 | 66,6 86,6 | 1102,,28 15,4 | 1114,,20 17,0 | 320 | 1250 | 745 | 820 | | | | H 25 | 40 | 2 | 2 | 50 | | | | | | | | | | | | | | | | ¡,8 | Hand air compressor | 28 | 315 | 230 | 340 | | | | | | | | | | | | | | | | | | | | | | | | | | | Performance data with 5% tolerance, referred to 20° C and an air pressure of 1013 mbar. Charging Capacity according to ship building regulations. Performance data on final pressure deviating from 30 bar will be provided upon request. Weights and dimensions for standard units with three-phase A. C. motor, IP 54, and flexible mounting. H 25 is also available with 30 and 63 l vessel. | | | | | | | | | | | | | | | | | | |
|