Petroleum/Gasoline level sensors - Gill Sensors - #1

/ 2


catalogue search
Petroleum/Gasoline level sensors - Gill Sensors
P. 01
Petroleum/Gasoline level sensors - Gill Sensors
P. 02
Pages:
Petroleum/Gasoline level sensors - Gill Sensors


See other catalogues for Gill Sensors

Text version of the page
CUSTOM

Petroleum/Gasoline level sensors - 31797 Petroleum/Gasoline

Fully Confi gurable OutputIndividuallydesigned

Key Features

No Moving PartsHigh Accuracy Race Proven Thermally Stable Fully Submersible Lightweight

*Examples of current Petroleum/Gasoline level sensors
Gill Motorsport Petroleum/Gasoline Fuel Level Sensors are specifi cally designed for use in the fuel cell or collector. Gill design and manufacture each sensor to match the customer’s exact requirements and with no moving parts used within the consrtuction, this product is a genuine solid-state device.Each sensor is designed with integrated electronics, customer specifi ed harness or integrated connector and is fully immersible in race fuel. A novel use of a capacitive measurement technique combined with compact, lightweight, robust designs ensure this sensor is the preferred choice for fuel cell installations in F1 and many other sports car series.Every Gill M-Series sensor is fully user confi gurable using our own simple software enabling the level settings to be fi nely adjusted to suit individual precise requirements. Gill offer a race proven sensor that is the complete solution for the extreme demands of Motorsport.

Specifi cation

ElectricalAnalogue OutputMechanical

Resolution 10 bit Supply Voltage+6VDC to +24VDCSupply Current<10mA @12V Serial InterfaceRS422 (internal) Sample Rate80Hz Probe Length0 - 700mm (customer to specify) MountingCustomer Specifi ed, various standard options availableWeightFrom only 80g (dependant on design)

Environmental

Voltage Output Range0.25V - 4.75V over sensing range or customer specifi ed, fully confi gurableRange Accuracy±0.5% of fuel depth @20ËšC Protection Class IP68 Operational Temperature0°C to 125°C EMC Immunity LevelSAE J1113/2 1996 design guidelineVibration
15g RMS (24-2000Hz) &SAE J1455 design guidelines used

Wiring

Wire/ConnectorCustomer Specifi edFlying lead or integrated connector of customer choice or combinationWiring GaugeTypically 26 AWG (options up to 20 AWG if requested)Cable Material CompatibilityWiring sleeved with either Fluorocarbon or Raychem DR25, or customised to customer specifications FinishAnodised to DEF STAN 025

Fuels

Compatible Medium Race PetroleumsGasoline Unleaded Petrol (95 RON) Low Leaded Petrol (98 RON)

M-Series

Gill Sensors, Solent House, Cannon StreetLymington, Hampshire, SO41 9BRT: +44 (0) 1590 613 400 E: info@gillsensors.co.uk
CUSTOM

pageCatalog pdf di En 2012-02-07-16