| Milling and Turning Packages (functionality available when combined together) C-Axis Programming and Live Tooling When GibbsCAM's milling and turning modules are combined, C-axis and live tooling capabilities for any number of tools are supported. Face and Diameter Milling Operations Perform milling operations on both the face and diameter of the lathe manufacturer stock including the machining of slots, holes, cross-drilling, pocketing, face milling and face drilling. Also includes the ability to contour on the face of a component as well as the diameter. Full Cut Part Rendering Support GibbsCAM's Cut Part Rendering feature completely supports the Mill/Turn capability to provide an accurate representation of the process and the finished part. Y- and B-Axis Support Ability to program toolpaths requiring Y-axis and/or B-axis mill work as well as B-axis angular reorientation for turning operations. Advanced Milling Option Multiple Coordinate Systems Workplanes can be defined in any 3D orientation on the part to create and machine geometry. Also useful for programming multiple part orientations and vise locations. Tombstone Machining Machine multiple sides of a part or fixture using 4th- or 5th-axis rotary table positioning. 5th-Axis Rotary Positioning Automatically calculate A- and B-axis rotations from user-defined workplanes. Rotary Milling Option_ Simultaneous Rotary Machining Allows you to rotate one axis and machine at the same time. Radial or Flat Geometry Creation Geometry can be entered as either radial or flat. Flat geometry is cylindri-cally wrapped around rotation axis. |