Solid Polymer POM (Acetal) based EP12™ - GGB - #1

Text version of the page

EP12™ Bearing Material EP12™ is a trademark of GGB. ©2010 GGB. All rights reserved. www.ggbearings.com 03-10 EP12™ Bearing Material Characteristics Applications • Injection moulded polyoxymethylene based and modified bearing material • Colour: white General Generally applicable within the limits of the material properties Industrial Domestic appliances, furniture, office equipment, sports equipment and many more Composition & Structure Operating Conditions Availability Injection moulded thermoplastic dry bearing material POM + PTFE dry good Ex Stock • N/A To order • Bushes, special dimensions and shapes oiled good greased good water fair process fluid good after resistance testing Microsection Bearing Properties Unit Value Dry Maximum sliding speed v m/s 1.0 Maximum pv factor The pv Limit is depending on the heat dissipating surface to contact area ratio 1) AH/AC = 5 2) AH/AC = 10 3) AH/AC = 20 MPa x m/s 1) 0.04 2) 0.09 3) 0.18 Coefficient of friction f – 0.18 - 0.30 Grease lubrication Maximum sliding speed v m/s - Maximum pv factor MPa x m/s - Coefficient of friction f – - General Maximum temperature Tmax °C +125 Minimum temperature Tmin °C -40 Maximum load p static MPa 65 Shaft surface finish Ra ìm 0.3±0.2 Shaft hardness HV >200 Injection moulded thermoplastic dry bearing material with additives homogeneously mixed in