Catalogue Single Gas Monitor MICRO III
www.gfg.biz
print switch display
Page / 2
Contact the
Manufacturer
Where to buy
this product ?
Request
a Quote
GfG - 40845, 14374, 208908
/ 2
See other catalogues for GfG
Text version of the page
The smallest single-industrial gas detector
Small, light and robust
The MICRO III Is an extremely small Instrument compared to other detectors. With Its dimen­sions of only 47 x 88 x 25 mm (WxHxD), It weighs only 61 grams and can comfortably fit Into a shirt pocket. A built-in clip secures the MICRO III safely to a belt or pocket. The casing Is extremely shock and scratch resistant. The protection type IP 56 Indicates that the Instrument Is sealed against dust and water. The MICRO III uses the AQUA-SHIELD (accesso­ry sensor Inlet) which ensures that the moni­tor will provide excellent performance In harsh conditions.
More protection through easier operation
The G 201 and the G 202 Is produced without buttons or switches. Therefore an operating error Is completely eliminated and time con­suming training Is reduced.
The plug-in smart sensor can be easily
replaced. The MICRO III recognizes the new
sensor type, another measuring gas, detec­tion range, calibration curve, as well as alarm threshold values.
Numerous features
The MICRO III comes standard with many fea­tures including automatic zeroing, Auto-Cal
calibration, confidence bleep, battery check,
and three factory set alarm points.
The following models are available:
G201 with loud alarm horn and bright alarm
lamp
G202/G212 as G 201, additional: display for
gas concentration, battery capacity and ser­vice control
G203/G213 as G 202, additional: Peak/ mini­mum calibration, TWA/STEL, control keys for display light and service functions.
All MICRO III devices feature audible or a visible
confidence signal. Zero point adjustments can be carried out quickly and easily In fresh air.
Attachable pump
An electrical high-performance pump will take samples of gases from mines or tanks. The pump replaces the battery cover and is a fixed part of the instrument with its own
power supply. The operation of the pump will
have no influence on the operation time of the MICRO III.
Loud audible alarm
The audible alarm of the MICRO III has a changing frequency. Machinery noises do not interfere with the horn signal, like in the case
of a monotone alarm horn. Simultaneously,
two very bright, alternately flashing LED's Indicate a gas alarm. The LED's are visible at 360°. The three alarm levels and the battery alarm are clearly distinguishable.
Up to 9 months operation
One single AA battery powers the MICRO III for up to 9 months permanent opration. The bat­tery can be replaced easily. Once the battery has been changed, the MICRO III is ready for another 9 months after a short warm-up
time. This reduces the cost of ownership.
micro III - Technical Data
Gases and Detection Ranges G201, G 202 und G 203
Detection principles
Gas supply
diffusion / pump (accessory)
Temperature range
-20 .. +50 °C
Humidity
5 99% r.h.
Ambient pressure
700 1300 hPa
Dimensions
47 x 88 x 25 mm (WxHxD)
Weight
61 - 85 g
Power supply
dry cell battery (AA 1,5 V)
Operational time
up to 9 months
Casing
high impact ABS, titanium coated, protection: IP 56
Alarms
3 Alarm thresholds
battery alarm
visual - 2 LED's, 360° visible audible - Horn, 95 dB at 30 cm
Approvals
EEx Ib IIC T5 up to 50 °C EEx Ib IIC T6 up to 40 °C
Pump. U.L. pending
CO
Carbon monoxide
300 ppm
H2S
Hydrogen sulphide
100 ppm
O2
Oxygen
25 Vol%
G202 und G203
CO
Carbon monoxide
500 ppm
CO
Carbon monoxide
1000 ppm
CO
Carbon monoxide
2000 ppm
SO2
Sulphur dioxide
10.0 ppm
NO
Nitrogen monoxide
100 ppm
HCL
Hydrogen chloride
30.0 ppm
HCN
Hydrogen cyanide
50.0 ppm
NH3
Ammonia
200 ppm
C2H4O
Ethylene oxide
20.0 ppm
H2
Wasserstoff
2000 ppm
HCN
Hydrogen chloride
50.0 ppm
PH3
Phosphin
10.0 ppm
SIH4
Silan
20.0 ppm
COCl2
Phosgene
1.00 ppm
H2
Hydrogen
2000 ppm
G2H122 u
Hydrogen
1.00 Vol.%
H2
Hydrogen
4.00 Vol.%
H2S
Hydrogen sulfide
500 ppm
G212 und G213
CL2
Chlorin
10.0 ppm
NO2
Nitrogen dioxide
30.0 ppm
CLO3
Chlorine dioxide
2.0 ppm
O3
Ozone
1.00 ppm
MICRO III
models
Display
Control-Keys
Peak
G201
no
no
no
G202
yes
no
no
G203
yes
yes
yes
GfG Gesellschaft für Gerätebau mbH P. O. Box 440164, D-44390 Dortmund Phone: +49-2 31-56 40 00 Fax: +49-2 31-51 63 13 E-mail: info@gfg-mbh.com Internet: www.gfg-mbh.com
We reserve the right of modification
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
pdf-page pdf di En 2008-11-47-20