video corpo

Taurus - 8 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

Catalogue excerpts

TAURUS Pneumatic-hydraulic Blind Rivet setting Tools The Experts in Blind Riveting ® GESIPA Blindniettechnik GmbH Nordendstraße 13-39 • 64546 Mörfelden-Walldorf Phone (49) 6105 962-0•Fax (49) 6105 962-287 E-Mail info@gesipa.com • http://www.gesipa.com TAURUS1 TAURUS 2 TAURUS 3 TAURUS 4 A complete programme!

 Open the catalogue to page 1

30 Ø 278 Ø 88 198 68 48.5 22.5 Ø 57 259 TAURUS1 (mm) TAURUS1 Part-No. 756 0001 Working Range: Blind Rivets up to 4 mm Ø Alu/Steel (max. mandrel diameter 2,5 mm) Technical Data: Traction Power: 4.200 N at 5 bar Operating air pressure: 5-7 bar Stroke: 15mm Air consumption: per cycle ca. 1,0 ltr. Air hose connector: 6 mm Ø (1/4’’) Noise emission: 77 dB Vibrations: < 2,5m/s2 Nosepieces and Accessories: Nosepieces: 17/18 (in working position) 17/24, 17/27 (in tool bottom) Maintenance wrench: SW12/14, SW14/17 1 oil bottle 100 ml 1 oil refill can Operating instructions with spare parts list Comparing...

 Open the catalogue to page 2

57 312 Ø 128 332 213 83 63.5 22.5 Ø 30 Ø TAURUS 4 (mm) 57 312 Ø 128 317 213 83 63.5 22.5 Ø 30 Ø TAURUS 3 (mm) Ø 106 57 291 278 198 68 48.5 22.5 Ø 30 Ø TAURUS 2 (mm) TAURUS 2 Part-No. 757 0007 Working Range: Blind Rivets up to 5 mm Ø all materials and up to 6 mm Ø Alu/Steel (max. mandrel diameter 3,2 mm) Technical Data: Traction Power: 9.000 N at 5 bar Operating air pressure: 5-7 bar Stroke: 18 mm Air consumption: per cycle ca. 2,3 ltr. Air hose connector: 6 mm Ø (1/4’’) Noise emission: 78 dB Vibrations: < 2,5m/s2 Nosepieces and Accessories: Nosepieces: 17/27 (in working position) 17/29, 17/32,...

 Open the catalogue to page 3

For direct disposal of the broken mandrels: The evacuation tube Removing the mandrel container and installing a special nipple instead allows to connect an evacuation tube for the broken mandrels. The mandrels can then be collected in an adequate container, so that the workstation remains clean and the riveting task can be performed without interruption. Use of the 5 feet evacuation tube is only possible with the tool’s air suction open! To make sure that the elements of the riveting application will be in contact: The pressure trigger The pressure trigger mechanism is installed instead of the...

 Open the catalogue to page 4

For a thorough check of the number of riveting operations: The TAURUS with rivet counter When several riveting operations are necessary to obtain a reliable part fixing, quality and safety depend of the presence of each individual rivet in the application. A special sensor installed in the tool, connected to an external processing unit allows a reliable count of the rivetings and a reliable appreciation of the quality of the fastening. The sensor is installed just in front of the broken mandrel container and records every mandrel ejection. Signal processing can be performed either locally with...

 Open the catalogue to page 5

A worldwide unique jaw mechanism (patent pending): Not just jaws, but a lot more All tools of the TAURUS series are equipped with a unique and completely new jaw mechanism. Compared with conventional systems, following features are decisive: •The three jaws are not anymore finding their place freely in the jaw housing. Each jaw slides back and forth in an individual channel,under perfect control. •The jaws are not anymore applied on the mandrel surface by just the pressure of a spring, but propelled by the full energy of the compressed air, they firmly clutch themselves into it. The pressure applied...

 Open the catalogue to page 6

The Experts in Blind Riveting ® TAURUS series in detail Main features at a glance: Modular design for the complete tool series: •high level of common parts – low spare parts inventory and easy maintenance Jaw assembly (patent pending): •with jaws guided in independent channels and pneumatic contact pressure •long life duration •safe and secure gripping of the mandrels •one single jaw assembly for all rivet dimensions Performance •high setting force and low tool weight •faster working cycles •stroke optimized for every tool type Economy •low compressed air consumption through same air for rivet...

 Open the catalogue to page 7

All GESIPA Blindniettechnik GmbH catalogues and technical brochures

  1. Flipper®

    1 Pages

    En
  2. GAV

    12 Pages

    En
  3. PowerBird

    2 Pages

    En
  4. Solar programme

    2 Pages

    En
  5. Winkelkopf 1+2

    1 Pages

    En
  6. TAUREX Axial

    1 Pages

    En
  7. Angle head 1+2

    1 Pages

    En
  8. Angle head 1-4

    1 Pages

    En
  9. FireBird®

    2 Pages

    En
  10. AccuBird®

    2 Pages

    En
  11. GESIPA brochure

    24 Pages

    En

Archived catalogues