up to 10 bar (145 psi)

AirLiquid PN-Module

pneumatic module >>>

fully compatible with: Amphenol C 146 M | Hypertac HYM (Hypermod) | Lapp Contact EPIC MC (Lapp Group) Thomas & Betts Pos-E-Con M | Walther Werke Procon MO | Weidmüller ConCept | Wieland revos FLEX

>>>

Our pneumatic AirLiquid PN-Module has been improved for use with liquids. Sealing material is Industrial viton (FKM / Fluorcarbon rubber) providing high resitance against heat aswell as oils, gasoline, diesel, biodiesel or ethanol. The Module is available with one or two pneumatic nipples. Brass-valves, locked on socket side, ensure reliability, efficiency and high mechanical firmness within the durable industrial environment. An operating-pressure range of up to 10 bar (145 psi) means a solid and lasting performance for your application.

Hinweis

systemfeatures

note

operating pressure range up to 10 bar (145 psi)operating path of 4 mmlocked on one side (TwinValve locked on both)high mechanical firmnesshigh temperature resistance Viton-sealing (FKM / Fluorcarbon rubber)

customer advantage Version PushPull

one or two pneumatic niples The PushPull PN-Module’s technical abilities equal the AirLiquid PN-Module but provides a push/pull-mechanism for rapid assembly/disassembly of the hose. timesaving assembly and quick start of operationeasy to service and maintainno special tools required

Version Twinvalve

The TwinValve PN-Module’s technical abilities equal the AirLiquid PN-Module but provide locked valves (check valves) on both sides of the pneumatic connection stopping the flow when disconnected.

technical specifications

insulation materialtesting pressure valvestemperature rangehose connector (tube inner diameter)valve materialnominal sizesealing material 35 bar (508 psi)-20°C to +100°C2.5 mm (other on request)PA6.6 fiberglas strenghened | UL94-VObrass Ms582.5 or 4 mmViton (FKM) on request also NBR or EPDMoperating pressure10 bar (145 psi)

Attention - security Note

When processing conducting or combustible liquids or gases by pneumatic modules be sure that under no circumstances there are electrical modules mounted within the same connector housing.
technical subject to change

industrial interconnection systemswww.ges-electronic.de

GES