Single chamber desiccant dryer GTT 101 ES - Gerco - #1

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Arial", sans-serif; } .font2 { font:11.00pt "Arial", sans-serif; } .font3 { font:12.00pt "Arial", sans-serif; } .font4 { font:23.00pt "Arial", sans-serif; } ■us) Product ■ Information Desiccant dryer GTT 101/ 60 ES Application area The GTT 101 ES is a compact one-chamber desiccant dryer. It is suited to dry all plastics fully automatically if they do not emit volatile components* other than water during the drying process. The dryer works in a temperature range between 60 and 160 °C , +/- 2 °C. Residual moisture of < 0.02 % can be achieved. It consists of a dry air generator, a heatable material container and the automatic control which is situated in the switch box on the side. The functional diagram (see drawing below) shows the principle of the drying process of a desiccant dryer. Partial air flow is directed through two desiccant chambers. One chamber is located in the drying cycle and dehumidifies the air that comes out of the desiccant chamber. The second is regenerated at a temperature of 280 ° C. Automatic operation of the regenerating, cooling and drying phases is achieved by the time control which is integrated in the SPS. *Please ask the producer of the material for the characteristics of the drying material. 1 Fan 2. Regeneration heater 3. Waste air valve 4 Molecular sieve 5 Three way engine valve 6 Granular material heater 7 Material container 8 Recirculated air filter 9 Cooler- no water! Standard Features: O Mobile compact installation of 110 / 60 liters capacity with insulated container O After-run fan function O Clock timer O Integrated return air cooler and thermostatic cooler control O Galvanized, removable sieve container O Easily accessible, replaceable air filter O Automatic regenerating and drying cycle O Manual removal device and suction conveying connection O Switch box mounted on the side with automatic control O Cut out section in cover for installation of GERCO conveyer O Two chamber dry air unit for continuous drying Gerco Apparatebau GmbH & Co. KG, Zum Hilgenbrink 50, G - 48336 Sassenberg,Tel.:0049-2583/9309, FAX 0049-2583/9309-99 E-Mail info@gerco.de Produktinfo071107_englisch 25/60