?

Spring units for elastic support of pressesare manufactured by GERB. High qualitycoil industrial springs are fitted into rigid steel boxesdesigned to resist prestressing forces.

?

Monitoring the accelerations on various professional presses as a measure of both strain on the machine itself and of the machine’s wear has demonstrated that springsupported machines all showed lower wear and tear than those conventionallymounted.

?

Prestressable spring Viscodamper
® combinations guarantee easy align- ment and also re-alignment in caseof tilting or settling of the press

?

Viscodampers
® installed parallel to the spring units improve the stability of the machine and the vibration-isolating effect.The damping also ensures that the machinequickly returns to its idle state following each stroke so that even automatedfeeding of the press will not cause any difficulties.

?

GERB spring units are usually fixedwithout bolts manufacturers simlply by means ofGERB resilient pads.

?

Since the dynamic forces transfered from the press to the subfoundation are greatlyreduced by the vibration isolating moun-tings, the design of the subfoundation can be limited to static loads thus leading to lower construction cost of the founda-tion.
Spring Supported Press with Inertia Block Direct Spring Supported with Steel Frame