S4000TH H2S Gas Detector - General Monitors - #1

Text version of the page

H2S MODEL S4000TH Features • Event logging • 4-20mA output • HART and Modbus communication • Detection Ranges (0-20 ppm, 0-50 ppm, 0-100 ppm) • Warning, Alarm & Fault Relays • Calibration, Calibration Check, Set-up Mode • Remaining Sensor Life Indication • Wireless capability Benefits • Stores fault, gas check, calibration, and alarm event history • Industry standard output for remote alarm and fault indication • Provides complete status and control capability in the control room • Wider range of applications • Provides local alarm capability • Simplifies operation and maintenance • Reduces downtime by providing an estimate of remaining sensor life • Compatible with ELPRO Technologies wireless devices Description The Model S4000TH Intelligent Sensor is a microprocessor-based transmitter designed for use with General Monitors' Metal Oxide Semiconductor (MOS) sensor. This unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It is designed to detect hydrogen sulfide in parts per million (ppm) levels and provide status indication and alarm outputs. All of the S4000TH electronics are contained within an explosion-proof housing so that sensor information can be processed at the sensor site. It provides a 4-20 mA signal which is proportional to 0 to 100% of the detection range at the sensor. In addition, the S4000TH includes warning, alarm and fault relay contacts that can be used to indicate an alarm or fault condition, and dual redundant Modbus or HART communications. Configurations with relays, Modbus and HART are available to meet many needs. The S4000TH includes a three (3) digit LED display. This local digital display continuously indicates gas concentrations during normal operation and in the calibration check mode, calibration prompts during calibration mode, display codes during the setup mode and eight fault codes. The S4000TH has four different operating modes. First, the normal operating mode in which alarms are active and the display and 4-20 mA readings are proportional to the gas concentration at the sensor. Second, the gas check mode that allows the user to apply a gas and check the sensor response while alarm outputs are inhibited. Third, a calibration mode in which gas is applied to the sensor to calibrate the unit. Finally, a set-up mode which allows the user to review or change setup options such as relay settings, sensor range, and Modbus parameters. Selecting Setup Mode on the S4000TH is accomplished by using the magnetic switch, HART or Modbus command. Options • Sensor Range (0-20 ppm, 0-50 ppm, 0-100 ppm) • Energized/de-energized relays • Latching/non-latching relays • Alarm setpoints for relays • Baud rate, data format, and address for each Modbus channel Protection for life. GENERAL MONITORS Intelligent Sensor for H2S Gas Detection