catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Pressure transmitter, Ultrasonic level sensor, Transducer, Float level switch, Diaphragm solenoid valve
Text version of the page
| | ||||||||||||||||||||||||||||||||||||||||||
| MINIATURE ■ | ||||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||
| How To Order Use the Bold characters from the chart below to construct a product code. Please reference Notes. | ||||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||
| PS41 -10 -4MNB -C -H -XX -XXXX | ||||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||
| 12 3 | 4 | 5 | ||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||
| 1 Pressure Range Code Insert Pressure Range Code from Table 1, below. 2 Pressure Fitting1 ~-2MNB=1/8"NPTM -4MNB = 1/4"NPTM -2MGB = 1/8" BSPM (G type) -4MGB = 1/4" BSPM (G type) -4MSB = 7/16"-20 SAE Male -6MSB = 9/16"-18 SAE Male 316 Stainless Steel -2MNS = 1/8"NPTM -4MNS = 1/4"NPTM -4MGS = 1/4" BSPM (G type) -4MSS = 7/16"-20 SAE Male 3 Circuit -A=SPST/N.O. -B = SPST/N.C. -C = SPDT 4 Electrical Termination -SP=Spade Terminals2 -FLXX=Flying Leads3 -FLSXX=Flying Leads w/PVC Shrink Tubing3 -ELXX=1/2" NPT Male Conduit w/Flying Leads4 -CABXX = 18 AWG PVC Cable5 -H = DIN 43650A Male Half Only6 -HR=Right Angle DIN 43650A Male Half Only6 -HC=DIN 43650A 9mm Cable Clamp6 -HCR=Right Angle DIN 43650A 9mm Cable Clamp6 -HN = DIN 43650A with 1/2" Female NPT Conduit6 -HNR=Right Angle DIN 43650A with 1/2" Female NPT Conduit6 | 5 Options7 -V=Viton® Diaphragm -N = Neoprene Diaphragm -E=EPDM Diaphragm -10A = 10A @ 125/250 VAC Max. Rating -G = Gold Contacts (for loads less than 12 mA @ 12 VDC) -RD = Reduced Differential (25% reduction typical) -IP = Ingress Protection8 -OXY=Oxygen Cleaned -WF=Weather Pack Connector, Female -WM=Weather Pack Connector, Male -DE=Deutsch Connector, Male, DT04 Series 6 Fixed Set Point (optional) A. Specify set point -FS (in PSI or BAR, see example)9 B. Set Point Actuation R on Rising Pressure F on Falling Pressure Example: -FS0.5BARF for 0.5 BAR Falling or -FS5PSIR for 5 PSI Rising | Notes: 1. Other fittings available. Consult factory. 2. Requires -10A or -G option. (20% increase in deadband typical) 3. 18" is standard. Specify lead length in inches (max. 48"). e.g. -FL18 or -FLS30. 4. 18" is standard. Specify lead length in inches (max. 48"). e.g. -EL18 or -EL30. 5. 36" is minimum. Specify cable length in inches. e.g. -CAB36or-CAB120. 6. DIN connectors require -C SPDT circuit. 7. Options -10A, -G or -RD cannot be combined. 8. Ingress Protection is available only with -FL, -FLS or -CAB Electrical Termination choices. Ingress Protection requires Fixed Set Point -FS. 9. Set Point must be within Pressure Range selected in Step 1. | ||||||||||||||||||||||||||||||||||||||||
| | LU LU Û£ LU Q_ | | ||||||||||||||||||||||||||||||||||||||||
| Table 1 — Pressure Range Codes | ||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||
| Repeatability and set point of units may change due to the effects of temperature. ' These numbers are for the standard microswitch. With either the -SP or -10A option, the values are typically 20% greater than those listed. With the -RD option, the values will be typically 25% less than those listed. In certain applications deadband can be tailored and controlled to customer specifications. Consult factory for details. | ||||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||
| Visit www.GemsSensars.com for most current information. | 1-10 | |||||||||||||||||||||||||||||||||||||||||
| | ||||||||||||||||||||||||||||||||||||||||||