2 Coil Construction
(blank) = Tape-wrapped, Class-B, with lead-wires (12" long)*
W_= Lead-wires, non-standard length (specify in inches)
1 = Encapsulated coil
5 = Encapsulated coil with 0.110 spade terminals 10 = Rectified coil for AC voltage (2 watt only)
3 Body Material
(blank) = Nickel-plated brass*
4 Plunger Seal Material
(blank) = Nitrile* V = Viton® E = EPR MQ = Silicone
5 O-Ring Material
(blank) = Nitrile* VO = Viton® EO = EPR MQO = Silicone
6 Body Port Configuration
(blank) = #10-32 straight thread ports* BM = M5 x 0.8 ports
MM = Manifold mount with #10-32 threaded stud+ MM2 = Manifold mount with M5 x 0.8 threaded stud* BO = Bottom under-seat port (max orifice = 1/16")
7 Voltage
_VDC = DC (specify voltage)
_VAC =AC rectified 2-watt only (specify voltage)
8 Additional Options
OC =Cleaned for oxygen use QO =Quiet operation (2-way N.C.) VAC =Vacuum application (0 to 29.5" Hg)
* Standard selection; will be used unless otherwise specified. Standard selections are not referenced in final part number.
* Teflon® o-ring not suitable for manifold mount.