2 Coil Construction
(blank) = Tape-wrapped, Class-B, with lead-wires (12" long)*
W_= Lead-wires, non-standard length (specify in inches)
1 = Encapsulated coil
5 = Encapsulated coil with 0.110 spade terminals 10 = Rectified coil for AC voltage (2-watt only)
3 Plunger Seal Material
(blank) = Viton®* NB = Nitrile E = EPR N = Neoprene
4 O-Ring Material
(blank) = Viton®* NBO = Nitrile EO = EPR NO = Neoprene
5 Body Port Configuration
(blank) = #10-32 straight thread ports*
LC = 1/8"-27 NPT ports (2-way valves only)2 BM = M5 x 0.8 ports2
MM = Manifold mount with #10-32 threaded stud2* MM2 = Manifold mount with M5 x 0.8 threaded stud2*
6 Voltage
_VDC = DC (specify voltage)
_VAC = AC Rectified 2-watt only (specify voltage)
7 Additional Options
OC = Cleaned for oxygen use TP = PTFE coated plunger VAC = Vacuum application (0 to 29.5" Hg)
* Standard selection; will be used unless otherwise specified. Standard selections are not referenced in final part number.
Notes
1. Use prefixes from this column if you plan to select a Body Port Configuration other than the #10-32 straight thread ports.
2. Not available on Acetal bodies.
* Teflon® o-ring not suitable for manifold mount.