Tinytag Energy Data Logger
4Pages

{{requestButtons}}

Catalog excerpts

Tinytag Energy Data Logger - 1

DataSheet DataSheet Tinytag Energy Logger High accuracy Small size/lightweight The Tinytag Energy Logger can be used to monitor single and three phase energy supplies. It combines the level of performance required by experts with the level of simplicity required by those that are new to energy management. The unit is ideal for monitoring building energy supply, sections within a building or individual pieces of equipment. Data from the Tinytag Energy Logger can be used to identify power hungry or inefficient equipment and peak load times, and can highlight equipment that is left powered up or idling unnecessarily. The Tinytag Energy Logger provides visibility of energy usage so that effective measures can be taken to reduce electricity bills, lower carbon footprint and improve environmental performance.

Open the catalog to page 1
Tinytag Energy Data Logger - 2

Tinytag Energy Logger Benefits • Portable - supplied in its own carry case, the unit is small and lightweight making it ideal for use in on-site visits. • Easy to use - select the required wiring configuration and the logger will display step-by–step instructions for the coil and cable connections. • Quick and easy coil fitting - current is measured using non-invasive flexible coils that can easily be clipped around conductors (where larger rigid clamps may not fit) and the voltage reading is taken from a standard mains cable. • Self-configuring - once connected the unit will...

Open the catalog to page 2
Tinytag Energy Data Logger - 3

What does it record? Property Logger Display Tinytag Explorer Software Peak over logging interval Average over logging interval Peak over logging interval Average over logging interval Power Factor • Display - the unit's display shows instantaneous rms current (A) from all three phases, the instantaneous rms voltage (V) and an instantaneous overall power figure (kW). • Automatic software calculations - when data is downloaded in the Tinytag Explorer software, the following information is calculated and displayed: • peak and average current • peak and average power • overall peak and average...

Open the catalog to page 3
Tinytag Energy Data Logger - 4

TGE-0001 Tinytag Energy Logger Specification TGEMeasurement Specification Physical Specification Current Voltage Frequency Operational Temperature Range Maximum Humidity 2000A AC RMS (Peak Surge Current 4000A) 200-253V AC nominal Nominal 50/60Hz Display Resolution Current Voltage Power 0.1A 0.1V 0.1 or 0.01kW depending on the size of the load being measured. *Including batteries Accuracy Current (RMS)* Voltage (RMS) Power (kW) Power Factor Length Width Depth Weight* Coil inner Diameter 1% of reading ±0.5A (above 10A) 0.5% of reading 2% of reading <0.02 error (above 1kW) Battery Type 4 x...

Open the catalog to page 4

All Gemini Data Loggers (UK) catalogs and technical brochures

  1. TGP-4017

    2 Pages

  2. TGU-4017

    2 Pages

  3. PB-5005-0M6

    1 Pages

  4. PBRF-8002

    1 Pages