Text version of the page

Geislinger Monitoring Features

In the following section some features of the Geislinger Monitoring are described.

Signalcurve

Shows the torsional vibration signal for each programmed application per one revolution.

Fourier

Shows the amplitude of the different orders for each application after a FFT (Fast Fourier Transformation) analysis.

Fig.5 S Signal curve graphics

Info Submenu

Contains general information about the programmed monitoring functions and current serial communication line settings. The programmed alarm curves are also shown in a graphical mode.

Serial Communication Line RS232 for Connection to a PC

Fig.6 F Fourier graphics

The Geislinger Monitoring is equipped with a standard RS232 communication interface located on the front of the System Unit. It is possible to transmit measured and analyzed values to a PC for further calculations. At the PC the values can be recorded with a simple terminal program, which is included in every Microsoft Windows software. The graphic evaluation of the recorded values can be carried out by a standard spreadsheet like Microsoft Excel.

Fig.7 Programmed alarm curves
Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 8 / 22