INSTALLATION The transducer can be installed on three types of supports: - brackets: the traditional method; requires a free surface for installation and uses two or more bracketsbased on the length of the transducer;- flanges: ideal in applications in which the rod has to pass through a hole and the transducer has tobe attached to the walls of the hole; in this case, you have to pay careful attention to conditions ofuse, especially in case of long strokes;- self-aligning joints: these are used to attach the ends of the transducer directly to the moving parts;it eliminates other attachment points and allows measurement of unaligned movements; this systemis unsuitable for very long strokes. TECHNICAL DRAWINGS - WITHOUT POSITIONS EQUIVALENCE TABLE - PRODUCTS / IP LEVEL PZ34-S PZ34-F PZ34-A PROTECTION LEVEL Depending on their structure and technology, GEFRAN linear displacement transducers guarantee differentlevels of protection against dust and liquids. You can choose within a range of IP40 to IP68, as shownon the following table:

IP40IP60IP65IP67IP68

PKLTLTMK2IC PA1PZ12PCPMI PY1PZ34PR65MK4 PY2IK1-IK2-RK-RKA PY3PME PSPMA LT67 PC67 PZ67 COMMUNICATION INTERFACE Potentiometers supply a ratiometric output in voltage. This means that the output voltage range dependson the voltage use to feed the transducer. ATTENTION! The potentiometer must NOT be used as a variable resistance.If you want a 0..10 VDC or 4..20 mA conditioned signal as a potentiometer output, you can connect aPCIR conditioner to the device output. Magnetostrictive transducers let you choose the most appropriate output interface for the application:- analog output in voltage:0..5 VDC/5..0 VDC, 0..10 VDC/10..0 VDC, ± 5 VDC, ± 10 VDC-analog output in current:0..20 mA, 4..20 mA- digital output:start/stop (multicursor), PWM (monocursor)- SSI output:16, 21, 24, 25 bit in binary or Gray code- CANopen output:CiA DP 3.01 rel.4.0 and DS406-Profibus output:DPV0 on RS485
05