Safety Expansion Relay

INT-05 Series

INDUSTRIAL SAFETY RELAYS

Applications

INT SERIES •Adds 3 safe outputs when used with S entrol safety relays IN T -03and IN T -04•Maintains safety circuit integrity by providing feedback to IN T -03 orIN S L witches AC or DC loads•DIN rail or panel mount • EDs indicate relay status T -04 to inhibit machine restart in case of component failure•Electrical isolation between input and output • T he IN T -05-024 or IN T -05-120 Expansion T -03 S afety Monitoring relay or IN S afety Relay is intended foruse as part of a safety circuit. It provides three additional safe output contacts when used with the IN T -04Emergency- S top S afety Relay. T he IN T -05 uses positive-guided relays along with feedback contacts tothe IN

Panel Mount Di m ensions

T -03 or IN T -04 safety relay to prevent machine start-up in theevent of a component failure.Voltage to the IN
2.17"5.5c m T -05 is switched thru the contacts of the IN T -03 orIN T -04. If a component failure occurs, the feedback loop to the IN T -03or IN T -04 prevents machine restart.
2.95"7.5c m 4.53"11.5c m 0.26"0.66c m 1.48"3.75c Slot for 35 mm m 2.46"6.25c DIN rail m ount m

General Specifications

U L / T UVAll Models

Wiring Door Open Configuration

C ontrol Input s (X1, X2 & Y1, Y2 terminal s ) Open-circuit voltage24VDCClosed-circuit current24mA Max. contact resistance30 Ohms
RESET ASAFEAUX.BCD S imultaneity500 ms typical
120 VAC 230 VAC60 VDCLOADS FUSE Safe Output s (A,B/ C ,D/E,F terminal s ) Voltage230 VAC/60VDCCurrent4A (resistive) Response timeON:< 40 ms, OFF:<30 msFuse4A, 250V, 5 x 20 mm, F/ T
L1L2 ASAFEAUX.BCD X1 X2Y1Y2 –+ L1L212X1X2Y1Y2N.O.N.C. AUX. Signaling Output s (F1,F2 terminal s )
Expansion RelayINT-05 Safety monitor RelayINT-03 Voltage120 VAC/30VDC
OUTPUTS OUTPUTS EF F1F2INT05WIR EFG Current1A (resistive)
Note: Transient protection is required across the load when switching an inductive load. 230 VAC60 VDC120 VAC30 VDCLOADS

Operation

A.With voltage applied to control inputs via IN T -03 or IN T -04 outputcontacts, relay energizesB.With control voltage removed, relay de-energizes C. If an internal failure has occurred, feedback loop will not closethereby disabling IN T -03 or IN T -04
File E 122942U 9880128199003

Order Infor m ationElectrical Specifications

Part Nu m berPower Input (L1.L2)Required Fuse INT-05-02424 VDC ± 15%Fast Acting 1/4 A (250V, 5 x 20 mm ,F/T) INT-05-120120 VAC+10%, - 20%, 50/60 Hz, 5VAFast Acting 80 m A (250V, 5 x 20 mm ,F/T) Warning— Each electrical rating is an individual m axi m u m and cannot be exceeded!

1-800-247-9447

GE Interlogix Industrial 19