DynaMIC - GE Inspection Technologies - #1

Text version of the page

Ultrasonics GE Inspection Technologies GE Inspection Technologies Ultrasonics GEInspectionTechnologies.com We reserve the right to technical modifications without prior notice. ©2004 General Electric Company. All rights reserved. GEIT-20030US (09/04) Krautkramer DynaMIC Quick hardness testing made easy. The new generation of rebound hardness testers. Accessories and specifications: Test method Rebound hardness testing according to ASTM standard A956; dynamic measuring method with quotient from rebound phase (Rp) and impact phase (Ip) speed with output of Leeb´s hardness HL = 1000 Rp/Ip Measuring range Depending on material groups; e.g. low-alloy steel: 150-1000 HL; 75-1000 HV; 75-700 HB; 35-100 HRB; 20-70 HRC; 30-100 HS; 250-2200 N/mm² 9 fixed material groups stored, 5 material groups user-programmable Display 4-digit LCD with switchable backlight Resolution 1 HL; 1 HB; 1 HV; 5 N/mm²; user selectable 0.1; 0.5; 1 HS / HRC / HRB Power Battery operation (2 x 1.5V AA batteries) AlMn / NiCd / NiMH Operating time AlMn / NiMH: > 30 hours NiCd: > 24 hours without backlight Permissible temperatures In operation: -15°C to 50°C (5°F to 122°F) In storage: -40°C to 70°C (-40°F to 158°F) Weight Approx. 300 g (approx. 0.7 lbs) Dimensions Approx. 160 mm x 70 mm x 45 mm (w x h x d); (6.3" x 2.8" x 1.8 in) Data memory (only DynaMIC DL) Data Logger up to 1,800 measurements, memory card up to 590 measurements, depending on the number of measurements per set. Storage of user´s own material tables with DynaSoft. Interface (only DynaMIC DL) RS 232 C bidirectional Application software for data transfer and documentation Instrument carrier and prop-up stand Certified hardness reference blocks Impact devices for different applications Test attachments for curved surfaces Memory cards for storing measurement and calibration settings Statistics Display of the average value; DL version: printout with maximum, minimum, average, absolute and relative range, absolute and relative standard deviation Impact devices Dyna D: tungsten-carbide spherical test tip of 3 mm (0.12") diameter, length 160.5 mm (6.3"), standard impact device Dyna G: tungsten-carbide spherical test tip of 5 mm (0.2") diameter, length 265 mm (10.4"), for solid test pieces, e.g. castings, forgings Dyna E: diamond test tip, length 168 mm (6.6"); for the hardness range over 650 HV Test attachments For better positioning with curved surfaces; for spherical, hollow spherical, cylindrical and hollow cylindrical surfaces with radii of 10 - 30 mm (0.4" - 1.2")