03200006 Silicone self-fusing tape. A 9.1 metre (10 yard) roll of silicone tape to protect connectors manufacturer. It is easy to install and provides excellent electrical isolation and protection from the environment. It is not recommended for use inside the casing of the machine. 40180-02 Connector Protectors. Package contains 10 pairs of connector protectors. 03839410 Male Connector Protector. Placed on the extension cable to connect to the female connector protector on the probe and provide environmental protection of connectors. 03839420 Female Connector Protector. Placed on the probe lead to connect to the male connector protector on the extension cable and provide environmental protection of connectors. Also placed on the extension cable to slide over the Proximitor
® Sensor connection and protect it from the environment. 330153-10 3300 XL 50 mm Connector Kit. Used on 3300 XL 50 mm probes and extension cables. Contains one male (removable nut) and female ClickLoc connectors, color-coded sleeves and two pieces slit PFA tubing. 163356 Connector Crimp Tool Kit. Includes one set of multi-connector inserts and connector installation instructions. Supplied with carrying case. 173873 High Temperature Cable Zip-Ties. PEEK cable tie is rated for use up to 200 C continuous temperature. Available in bags of 50 zip ties. 174804-01 Side Exit Probe Adapter Kit. Used to adapt side exit probes for the 330187 Extended Range Verification Kit. © 2006 Bently Nevada LLC ClickLoc™, FluidLoc®, and Proximitor® are trademarks of Bently Nevada, LLC. Viton® is a trademark of DuPont. PEEK® is a trademark of Victrex.
For Reference Only – See Document #174014 Specifications and Ordering Information Page 7 of 21