Non-sliding Mounting Brackets Extended Range Micrometer Kit

167285 Kit, 50 mm Clamp Mount (used with smooth-case side exit or threaded straight exit probes). The extended range micrometer kit contains a precision micrometer and a 100 mm (4 inch) AISI 4140 target and is intended for acceptance testing of Bently Nevada extended range transducers. Bracket options are available to hold 8mm – 50mm probes as well as the 50 mm Integral DE transducer. 167286 Kit, 50 mm Bolt Mount (used only with smooth-case side exit probes). 330187-AXX-BXX Option Descriptions A: 132327-01 50mm DE Transducer Bracket (can be used with 330979 Probe Clamp if sliding bracket is not desired). Probe options 0 1 8 mm to 50 mm probe threaded or smooth cases 0 3 8 mm to 50 mm probe threaded or smooth cases

Verification Kits

and an adapter for 50 mm Integral DE probes Each verification kit comes with: a verification kit bracket B: Micrometer Option a spindle micrometer with either 0 to 2 in or 0 to 50 mm range 0 1 Standard English 0-2 inch micrometer 0 2 two set screws Standard metric 0-50 mm micrometer a bracket securing bolt The material used for the verification kit bracket is T6061-T6 aluminum. 0 3 High-precision English 0-2 inch micrometer 0 4 131036-01 Verification Kit, Spindle Micrometer with English Units High-precision metric 0-50 mm micrometer 131036-02 Verification Kit, Spindle Micrometer with Metric Units 02120015 Bulk field wire. 1.0 mm

Accessories

173959-01 Manual
2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet. 148722-01 3300 XL Test Plug. The 3300 XL Test Plug has three self-contained test pins attached to three color-coded wires 1 metre in length, each terminated in a banana plug. The three-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor 02173009 Bulk field wire. 1.0 mm
2 (18 AWG), 3 conductor, twisted, shielded cable. Specify length in feet.
® 138492-01 Sensors. It is used to check the performance of the Proximitor 138493-01 Replacement panel-mount mounting pad
® Sensor from the test pin holes in the terminal strip without requiring the removal of the field wiring. Replacement DIN-mount mounting pad 04310310 3300 XL Proximitor
® Sensor Panel-mount Screws. Package includes four 6-32 UNC thread forming mounting screws (Supplied standard with 3300 XL Proximitor
® Housings [3300 XL option] ).
For Reference Only – See Document #174014 Specifications and Ordering Information Page 6 of 21