Relay Modules – software-programmable voting logic provides unmatched flexibility. 4- and 16-channel versions available along with a TMR version for 2-out-of-3 voting. Buffered Outputs – every dynamic input signal is conveniently available at the front panel via buffered output connectors for easy connection to portable and test instrumentation. Multiple Parameters From Each Channel – radial vibration channels can provide eight individual parameters (overall, gap, 1X amplitude/phase, 2X amplitude/phase, NOT 1X, Smax), meaning a 4-channel monitor actually provides up to 32 channels of measurements. Alarms can be set on any or all 8 parameters from each channel. 3500/53 Overspeed Detection Modules – can be integrated in same rack as other machinery protection modules for maximum cost-effectiveness. Configurable for 2-out-of-3 voting and available with TÜV Functional Safety approvals. Rack Interface Module – provides configuration interface as well as single-cable connection to System 1 software via conventional wired or wireless Ethernet networks. The 3500’s advanced design ensures that simultaneous data acquisition occurs for all channels in the rack. Analog Communications – all monitor module channels are available with analog 4-20 mA proportional outputs for compatibility with strip chart recorders, process control systems, and other instrumentation. 3500/15 Power Supply Keylock Security – all monitor modules are software configurable via the 3500’s Rack Interface Module – key lockable to prevent unauthorized tampering. – accepts worldwide ac/dc voltages and frequencies and can be supplied fully redundant to assure uninterrupted performance.
6