Position Variables: Gap Filter: 0.41 Hz 1-pole low-pass Metric or English units OK Filter: Full scale range 2.4 kHz 1-pole low-pass Filters Full Scale Range Direct Filter: Position: 1.2 Hz 1-pole low-pass 1 to 4 mm (50 to 150 mils) span with adjustable zero position Gap Filter: Gap: 0.41 Hz 1-pole low-pass –24 V OK Filter: Accuracy Full Scale Range 2.4 kHz 1-pole low-pass Position Variables: Position: ±1% of full-scale range 1 to 28 mm (50 to 1100 mils) span with adjustable zero position Input Impedance Gap: Non-configurable: -24 V 10 k Accuracy Position Channel Type Position Variables: Input Impedance Position Variables ±1% of full scale range The Position Channel Type measures mechanical motion using proximity sensors. Non-configurable: Speed Channel Type 10 k Position Variables are filtered and processed measurements from raw transducer signals. Position: Gap: The Speed Channel Type measures speed using proximity sensors. Mechanical position Configurable Options Gap, voltage or position Speed Variables are filtered and processed measurements from raw transducer signals. Speed Variables Each variable is independently configured with the following options. Speed: Up to four speed measurements Gap: Gap, voltage
Specifications and Ordering Information Part Number 173401-01 Rev. E (04/07) Page 6 of 20