Direct: Full Scale Range Up to three bandpass filtered amplitude measurements Direct: 100 to 500 µm (3 to 20 mils) peak-to-peak Gap: Gap voltage Gap: Vibration: -24 V Up to three bandpass filtered amplitude measurements Accuracy Vibration Variables: Configurable Options Input Impedance ±1% of full-scale range Each variable is independently configured with the following options. Non-configurable: Vibration Variables: 10 k Metric or English units Filter corner frequencies Number of filter poles The Thrust Channel Type measures axial shaft motion using proximity sensors. Full-cale range Thrust Channel Type Industrial filters Thrust Variables Direct Filter 1: Direct Filter 2: Thrust Variables are filtered and processed measurements from raw transducer signals. 4 to 4000 Hz (240 to 240,000 RPM) 1 to 600 Hz (60 to 36,000 RPM) Position: Direct Filter Characteristics: Gap: Axial position of shaft High-pass set by attack and decay, 1-pole low-pass Gap, voltage or position Gap Filter: Configurable Options Vibration Variables: 0.09 Hz 1-pole low-pass Each variable is independently configured with the following options. 0.5 Hz to 4 kHz, configurable Position Variables: 1-, 2-, or 4-pole high-pass and low-pass, configurable Metric or English units Full-scale range OK Filter: 2.4 kHz 1-pole low-pass Filters Direct Filter: 1.2 Hz 1-pole low-pass
Specifications and Ordering Information Part Number 173401-01 Rev. E (04/07) Page 5 of 20