20 pages in the catalogue
Condition Monitoring system for machines |
 |
Condition Monitoring system for machines p 1 1900/65A General Purpose Equipment Monitor The 1900/65A General Purpose Equipment Monitor is designed to continuously monitor and protect equipment that is used in a variety of applications and indus... |
 |
Condition Monitoring system for machines p 2 Feature List Specifications Continuous monitoring and protection is suitable for auto-shutdown applications Inputs Transducer Inputs Stand-alone operation on general-purpose equipment Users can confi... |
 |
Condition Monitoring system for machines p 3 Enveloping High-Pass: 25 Hz to 5 kHz, configurable 4-pole Enveloping Low-Pass: Vibration: raw transducer signals. The Acceleration Channel Type and Reciprocating Acceleration Channel Type continuously... |
 |
Condition Monitoring system for machines p 4 Integrated: 100 to 500 µm (5 to 20 mils) peak to peak Filters Input Impedance Bias Voltage: Vibration Variables: 3-wire Voltage Mode: -24 V Accuracy Bias Filter: Vibration Variables: Vibration: 0.5 Hz... |
 |
Condition Monitoring system for machines p 5 Direct: Full Scale Range Up to three bandpass filtered amplitude measurements Direct: 100 to 500 µm (3 to 20 mils) peak-to-peak Gap: Gap voltage Gap: Vibration: -24 V Up to three bandpass filtered amp... |
