Text version of the page

g

GE Consumer & Industrial GE Automotive Controls

Dual Function Pressure Switch

General Description:

GE Automotive controls pressure switches provide low cost, on / off controls for many automotive applications. The snap–action disc reacts to changing pressure by reversing its curvature and activating electrical switch contacts. The GE Dual Function switch utilizes patented single disk, double snap action.

Typical Calibration Specifications: High Pressure Cutout Circuit: Typical Applications:

High pressure cutout combined with condenser fan control, to two speed/dual fan control

Technical Data

Electrical Applications:

- 12v with A/C clutch load (3.5A). - 5v with relay load (150mA). - 12v or 5v connected to control module port.

Circuit Configurations:

Cut Out: 430 15 psi Cut In: 250 - Three terminal with shared supply. - Four terminal with separate 5v/12v circuits. 30 psi Life Cycles: 50,000

Condenser Fan Circuit : Logic:

Cut Out: 300 15 psi Cut In: 250 Independent normally open or normally closed circuits. 20 psi Life Cycles: 250,000

Typical Mounting:

Stem fitting with Schrader valve, English or Metric.

Electrical Connection: Environmental:

Sealed, underhood connectors such as Cardell, Packard Electric “Weatherpack” series or Ford connector #F3LB 14A464 BA Meets typical underhood requirements for temperature, vibration, shock, salt spray, noise, humidity and fluid compatibility.