catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Radiant heater, Convector heater, Evaporator, Heater, Band heater
Text version of the page
| CONTROLS | ||||||||||||||||||
| Screw Plug Heaters Type 1P (1"NPT) | ||||||||||||||||||
| APPLICATIONS 90 Watts Per Square Inch For heating clean water only in commercial and/or residential applications. Element life is sacrificed in favor of a low initial heater cost. 60 and 45 Watts Per Square Inch Industrial water heating - many aqueous solutions which are compatible with steel and Incoloy. 23 and 20 Watts Per Square Inch For heat transfer oil, cleaners, high temperature air and gas heating. 15 and 12 Watts Per Square Inch For lubricating oils, medium viscosity oils, high temperature air and gas heating. 8 and 6 Watts Per Square Inch For #5 and #6 fuel oil heating, viscous materials, raw crude oil, residual oils, high temperature air and gas heating. | ||||||||||||||||||
| STANDARD FEATURES Heating Elements Incoloy 800 Sheath Material Heavy Wall (.028 in.) Medium diameter (.315 in.) Sealed Terminals Screw Plug Solid Bar Stock Construction Type 304 Stainless Steel Precision Spaced and Drilled Construction 100% Welded Heating Elements 100% Welded Terminal Housing 100% Welded Spacers and Brackets Installation Flying Leadwires Provided Only Standard Materials Needed in Field Service Wiring Modifiable in Field Assembly Repairable at Factory | ||||||||||||||||||
| SPECIAL FEATURES Single Pole Thermostat (A) 50-250°F Double Pole Thermostat (A1) 0-100°F, (A) 50-250°F, (A3) 150-550°F Over-Temp Cutout (C1) 225°F, (C2) 300°F, (C3) 535°F Explosion Resistant Terminal Enclosure Moisture Resistant Terminal Enclosure Sheath Sensing Type K(J) Thermocouple attached to one element for overheat protection. Type 316 Stainless Steel Screw Plug Terminal Housing Potted with Silicone Space Heater Mounted in Terminal Enclosure Offset (Spaced Away) Terminal Housing Other Features not Listed Above | ||||||||||||||||||
| 11/19/2001 Page 1 of 5 GAUMER COMPANY, INC. 13616 Hempstead Road Houston Texas 77040 Ph: 713.460.5200 Ph: 800.460.5200 Fx: 713.460.1444 Fx: 800.460.5700 www.gaumer.com sales@gaumer.com | ||||||||||||||||||