catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Phosphating bath, Steam boiler, Convector heater, Band heater, Boiler
Text version of the page
| CONTROLS | ||||||||||||||||
| APPLICATIONS The Gaumer Electric Process Type G Duct Heater is designed for rugged duty where air must be heated to temperatures higher than what would be normal for comfort heating. Temperatures as high as 1100° F are possible if the heater is properly selected. Contact Gaumer Process for assistance in selecting Type G Duct Heaters. HEATER SELECTION Single Row Coil (1G-----) For heating large quantities of re-circulated air thru a very small temperature rise (to 10 degrees) resulting in a low pressure drop and low heater face velocity (300-1000 fpm). Two or Three Row Coil (2G-----) or (3G-----) For heating large quantities of re-circulated air thru a temperature rise (10 to 50 degrees) resulting in a normal pressure drop and average heater face velocity (500-2000 fpm). Three Row or Four Row Coil (3G-----) or (4G-----) For average quantities of air thru a normal temperature rise (50-100 degrees) resulting in a low pressure drop and low heater face velocity (500-2000 fpm). 6, 8, 12 Row Coil (6G-----), (8G-----), (12G-----) For average quantities of air thru a higher than normal temperature rise (100-600 degrees). SPECIAL FEATURES -INS Insulated Section on Element Side of Flange -SPT Flange Attached Spacer Assembly -SS Stainless Steel Flange -W Wattage Other Than Cataloged -V Voltage Other Than Cataloged -ER Explosion Resistant Construction -LT Weatherproof Construction -J(K) Additional Sheath Sensing Thermocouple for Overheat Protection -HTR Space Heater Mounted in Terminal Enclosure -X Special Feature not Listed Above | ||||||||||||||||
| 10 kW | ||||||||||||||||
| STANDARD FEATURES Heating Elements Incoloy 800 Sheath Material Heavy Wall (.035 in.) Large Diameter (.475 in.) Sealed Terminals Standard Features High Temp Alloy Spacers Gaumer "Evenflow" Configuration Type K TC for Overheat Protection Insulated Terminal Section Construction Welded Heating Elements Welded Spacers Installation Flying Leadwires Provided Only Standard Materials Needed in Field Service Wiring Modifiable in Field Assembly Repairable at Factory | ||||||||||||||||
| 11/19/2001 Page 1 of 17 GAUMER COMPANY, INC. 13616 Hempstead Road Houston Texas 77040 Ph: 713.460.5200 Ph: 800.460.5200 Fx: 713.460.1444 Fx: 800.460.5700 www.gaumer.com sales@gaumer.com | ||||||||||||||||