Specifications Specifications
POWER INPUT OPTIONS for DC: PERFORMANCE:Fiber port: RJ-45 PORT CONNECTORS: 10 Mb HDX/FDX, ST connectors for multi-mode or single-modeRJ-45 Ports Data Rate: 10 / 100 Mb, FDX and HDX modes.
Auto-negotiation and auto-cross MDI-MDIX on both RJ-45 ports Occurs at LINK-enable. No crossover cables required.Non-blocking switching, 128KB packet buffer memory
Address buffer storage = 2K addressesAddress buffer age-out time = 300 seconds RJ-45 with auto-cross, 100BASE-TX and 10BASE-T: shielded 8-Pin female.
Supports shielded (STP) and unshielded (UTP) Cat. 3, 4, 5.
LED INDICATORS, dual, top front and in end:
POWER SUPPLIES for AC (EXTERNAL): POWER: ON for power applied
10/100 per RJ-45 port: Steady ON for 100Mb, OFF for 10 Mb speed
LK/ACT per port: Steady ON for LINK with no traffic, blinking for Activity.
F/H per port in end: Steady ON for F/D mode, OFF for H/D mode. Power input DC jack (8 to 15V) is 2.5mm, center +ve, with 6ft. DC cord
Input: 95-125vac at 60 Hz for “-d” models, 215-240vac at 50 Hz
for “-i” models that have IEC
power connector in the ext.
power unit.
Input: 100-240vac at 47-63 Hz for “-Hd”, “Hi” models, see footnote 1
Input: 100-240vac at 47-63 Hz for “-Pd”, “Pi” models, see footnote 2 NETWORK STANDARDS: Ethernet IEEE 802.3, IEEE 802.3u; IEEE 802.1p, 100BASE-TX, 10BASE-T,
10BASE-FL VLANs SUPPORT: Data packets that have the 4 bytes tagged VLAN field (IEEE 802.1q) field inserted
in them are received and transmitted unchanged by all CSN14 Converter Switches. OPERATING ENVIRONMENT: Ambient Temperature ratings:
CSN14: the ambient temperature rating is 0° to 40°C. CSN14H: the ambient temperature rating is –25 12V DC, internal (range of 8.0 to 15V DC), built-in screw terminal block for +, -, ground. The 12V DC jack is also present. 24V DC internal (range of 18 to 36V DC) built-in screw terminal for +, -, ground. The 12V DC jack is also present.
°
C to 60
°
C long term perindependent agency tests (UL), or –40
°
C to 85
°
C short term per IEC Type Tests CSN14P: the ambient temperature ratings of –40 -48V DC WARRANTY: internal (range of 30 to 60V DC), built-in screw terminal block for +, -, ground. The 12V DC jack is also present.
Note1: the 12V DC jack can be used for dual source DC power input
Note2: internal DC power floats, user may ground + or – if desired. Power Consumption, all models: 5.0 Watts typical. 6 Watts max.
°
C to 75
°
C long term perindep. agency tests (UL), or –50 Three years Made in USA
°
C to 100
°
C short term per IEC Type Tests.Cold start: CSN14H model to -20 AGENCY APPROVALS AND STANDARDS COMPLIANCE:
°
C, CSN14P model to -40
°
CAmbient Relative Humidity, all models: 5% - 95% (non-condensing)Altitude, all models: -200 to 50,000 ft. (-60 to 15,000m)
Conformal coating (humidity protection) option, request quote.
H and P models are designed for NEBS compliance, including
vibration, shock, and altitude. UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A.
NEBS L3 and ETSI compliant
H and P models: IEEE 1613 Env. Std for Electric Power Substations
P model: NEMA TS-2 and TEES for traffic control equipment
P model: designed for above-the-ceiling (plenum) installation
IEC61850 EMC and Operating Conditions Class C Power Substations PACKAGING: Enclosure: Robust sheet metal (steel)Dimensions of units: 3.5 in H x 3.0 in W x 1.0 in D (8.9 cm x 7.6 cm x 2.5 cm)
Weight: CSN14 Switch Units:
8.6 oz (243g) MOUNTING FOR CSN14 FAMILY OF SWITCH UNITS: Power Supply - d, i: 5.8 oz (165g)
Power Supply - Hd, Hi: 5.8 oz (165g)
Power Supply - Pd, Pi: 7.9 oz (225g)Cooling Method: Convection on regular model, case used as a heat
industrial sink on H
and P models Metal panel mounting clips: included
DIN-Rail mounting option:
Model # DIN-RAIL MC2, illustrated here;
Rack-mount option: Model MC14-TRAY.Depth: 6.0”, Width 17”, Height 2.25”(15 cm D x 43cm W x 5.7cm H) SWITCHES: Fiber port has manual selection of HDX or FDX, default is HDX
1: External 12V1A power supply, wall plug or power cord for North America ACreceptacles. Temperature rating same as CSN14, see above. (North America: for
spare, order Model PSH-12V1A-Hd. International: order Model PSH-12V1A-Hi with IECplug). 2: External 12V1A power supply, rated for outdoor temperatures same as CSN14,see above. Universal AC input with recessed IEC plug. (North America: for spare,order Model PSP-12V1A-Pd, International: order Model PSP-12V1A-Pi with IEC plug). ï›™ 2005 GarrettCom, Inc. Printed in United States of America Doc No. CSN14-R8 9/05GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or
model offerings without notice. GarrettCom, Magnum, Personal Switch, Link-Loss-Learn, S-Ring,
Convenient Switch and Converter Switch are trademarks and Personal Hub is a registered trademark
of GarrettCom, Inc. NEBS is a registered trademark of Telcordia Technologies. UL is a registered
trademark of Underwriters Labs. Ordering Information
Magnum CSN14-d,i Magnum Converter Switch, one 10 Mb multi-mode fiber ST and two 10/100 RJ-45 portsin a compact package, rated for office and wiring closet environments. Magnum CSN14H-Hd,Hi Magnum Hardened Converter Switch, one 10 Mb multi-mode fiber ST and two 10/100RJ-45 ports in a compact package, rated for factory floor environments. Internal 8 to
15VDC terminal blocks. External Ac power supply manufacturer included. Magnum CSN14H-12VDC Same as CSN14H-Hd,Hi except external AC power supply not included. Magnum CSN14H-24VDC Same as CSN14H-12VDC except for 24V DC power input. Magnum CSN14HR-24VDC Same as CSN14H-24VDC but includes DIN-Rail mounting option, Model DIN-RAIL MC2 Magnum CSN14H-48VDC Same as CSN14H-12VDC except for -48V DC power input. Magnum CSN14P-Pd,Pi Magnum Premium-rated Converter Switch, one 10 Mb multi-mode fiber ST and two 10/100 RJ-45 ports in a compact package, rated for temperature un-controlled (outdoor)environments. Internal 8 to 15VDC terminal block. External AC power supply included. GarrettCom, Inc.
478 23 Westinghouse Dri veFremont, CA 94539PH: (510) 438-9071FAX: (510) 438-9072Email: mktg@garrettcom.comWeb: www.GarrettCom.com
Magnum CSN14P-12VDC Same as CSN14P-Pd,Pi except external AC power supply not included. Magnum CSN14P-24VDC Same as CSN14P-12VDC except for 24V DC power input. Magnum CSN14PR-24VDC Same as CSN14P-24VDC but includes DIN-Rail mounting option, Model DIN-RAIL MC2. Magnum CSN14P-48VDC Same as CSN14P-12VDC except for -48V DC power input. Note: for a single-mode 10 Mb fiber port, insert the letter “S” after the “14” in the model number