DC POWER SUPPLY OPTIONS:-48VDC: Input -36 to -70VDC 24VDC: Input 20 to 40VDC 125VDC and 110VDC nominal: Input 88 to 300VDC Std. Terminal Block: “-, GND, +”, Power Consumption: Same as AC DC DUAL POWER SOURCE (OPTIONAL) LED INDICATORS PER RJ-45 PORT: LED INDICATORS, 100 Mb and 10 Mb FIBER PORTS: Magnum 6K32TRC models may be ordered with optional Dual DCpower input, for continuity of operation when either one of the DC input sources is interrupted. Available for -48VDC, 24VDC, or 125VDC. LK: On when twisted-pair link is operational. ACT: Blinking with port activity. LK and ACT combined on fixed ports. FDX/HDX: ON = full-duplex mode, OFF = half-duplex mode. 100/10 ON = 100Mb speed, OFF = 10Mb LK: Steady on when fiber link is operational. ACT: On with port activity, FDX/HDX PORT-SPECIFIC SETTINGS: MECHANICAL: Port-specific user settings (such as FDX or HDX, and copper 10/100 speed) can be set using software commands. Enclosure: Rugged high-strength sheet metal. Suitable for 1U rack- mounting or stand-alone. Rack-mounting brackets: 19" included; ETSI and 23" Telco optional. Cooling Method: free convection, special (patent pending) thermal techniques Dimensions: 1.70inHx17.0inWx9.0inD (4.32cmHx 43.2cmW x 22.9cmD) Weight: rack-mount 5.0 lbs. (2.0 kg) AGENCY APPROVALS AND STANDARDS COMPLIANCE: WARRANTY: UL Listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A NEBS Level 3 and ETSI Compliant for Carrier Central Offices IEEE 1613 Environmental Standard for Electric Power Substations IEC61850 EMC and Operating Conditions Class C for Power Substations Three years Made in USA

Specifications Specifications

32-port Convection-Cooled Industrial Managed Switch

PERFORMANCE:RJ-45 Ports: 100 or 10 Gigabit Ports, 1000 Mb: Fiber Ports, 10 Mb: Configurable, up to 4 ST ports max. per module, multi-mode or single-mode. Each port may be FDX or HDX, default is HDX Mb speed, full- or half-duplex mode, per port,individually determined.10/100 auto-negotiating & auto-cross, 32 ports max. Configurable, std. See selection of modules. Fiber Ports, 100 Mb (multi-mode and single-mode) : Configurable in themodule, SFF (Small Form Factor) featured for high fiber port density, up to 8 total per module, each FDX or HDX, default is FDX mode All Ports non-blocking: RELAY CONTACTS FOR ALARMS (OPTIONAL): µ s + packet time max (TX - TX, TX - FX, FX - FX, TX-G, G-G) Processing type: Store and Forward with IEEE 802.3x full-duplex flow control System aggregate forward and filter rate: 8.3Mpps (16 ports @ 100Mb speed FDX and 4 ports @ Gb speed FDX)Address table: 4K nodes, self-learning, with address agingPacket buffers: 480KB + 120KB for 1000 Mb Latency: 6 Form C, one NC indicating internal power, one NC software controllable. NETWORK STANDARDS: OPERATING ENVIRONMENT: POWER SUPPLY (INTERNAL): IEEE 802.3z, 802.3ab, 802.1p: 100BASE-TX, -FX, 1000BASE-SX, -LX Auto-negotiation and auto-crossover on TP, IEEE 802.3u See MNS-6K datasheet for software network standards, network security, redundant LANs management, GUI and other software features. UL 60950 “Component Parts” temperature rating: 140°F (60°C) IEC 60068 “Type Test” rating: -40° to 185°F (-40° to 85°C) Storage: -40° to 185°F (-40°to 85°C), Ambient relative humidity: 5% to 95% (non-condensing) Altitude: -200 to 13000ft (-60 to 4000m) Conformal coating (humidity protection) option: Request quote NETWORK CABLE CONNECTORS: AC Power connector: IEC-type, male recessed, ON/OFF switch (optional) Power Input, AC: 100 to 240 VAC, 47 to 63 Hz (auto ranging) Power Consumption: 45 watts typical with two fully-loaded fiber modules, 30 watts typical for a copper-only 24-port model. 1000 Mb ports: standard GBICs supported, see modules description 100 Mb Copper: Category 5 UTP/STP; 10 Mb: Cat. 3,4, 5 UTP/STP 100 Mb Fiber ports connector options: multi-mode FX-MTRJ, LC, ST, SC; single-mode LC, 20Km SC, and 40Km “long reach” single-mode SC. 10 Mb Fiber port connector: multi-mode and single-mode ST
ï›™ 2006 GarrettCom, Inc. Printed in United States of America Doc No. 6K32TRC-R2 10/06GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or model offerings without notice. GarrettCom, Magnum, S-Ring, Link-Loss-Learn, Industrial converter Switch, Convenient Switch and Personal Switch are trademarks and Personal Hub is a registered trade- mark of GarrettCom, Inc. NEBS is a registered trademark of Telcordia Technologies. UL is a registered trademark of Underwriters Labs. trademark of Underwriters Labs.

Ordering Information

Magnum 6K32TRC Magnum 6K32TRC Convection-cooled Managed Switch, base unit. Provides 16 fixed 10/100 RJ-45 portsand two optional ports module slot which may be configured with a selection of 10/100/1000 Mb fiber and copper connector types, 8 ports max. each slot. For licensed industrial management software, see applicable MNS-6K datasheet. Configuration Options: Magnum 6K32TRC base unit has two port module slots, each of which may be a module from below: 6KP8-45MT “4+4” module for 6Ks, w/four 10/100 RJ-45 and four 100 Mb 2km multi-mode FX MTRJ connectors 6KP8-SLC SFF Fiber module for 6K Switches, w/eight 100 Mb 15km single-mode FX LC connectors 6KP8-RJ45 TP Module for 6K32TRC switches, w/eight 10/100 Mb auto-negotiating RJ-45 ports 6KP8-MTRJ SFF Fiber module for 6K Switches, w/eight 100 Mb 2km multi-mode FX MTRJ connectors 6KP8-45SLC “4+4” module for 6Ks, w/four 10/100 RJ-45 and four 100 Mb15km single-mode FX LC connectors 6KP6-RJMST “4+2” module for 6Ks, w/four 10/100 RJ-45 and two 100 Mb 2km multi-mode FX ST connectors 6KP6-RJSSC “4+2” module for 6Ks, w/four 10/100 RJ-45 and two 100 Mb 20km single-mode FX SC connectors 6KP6-RJSSCL “4+2” module for 6Ks, w/four 10/100 RJ-45 and two 100 Mb 40km single-mode FX SC connectors 6KP6-RJ10ST “4+2” module for 6Ks, w/four 10/100 RJ-45 and two 10 Mb 2km FL ST connectors 6KP4-FXSC “2+2” 100 Mb Fiber module for 6K Switches, w/four 100 Mb FX SC connectors. 6KP4-F10ST “2+2”10 Mb fiber module for 6K Switches, w/four 10Mb 2km FL ST connectors Note: Several other Port Module types are available. See Configuration Guide. 6KP5-G4RJ “G+4” module for 6K32TRC Switches, uses, one 6K slot and provides one GBIC open transceiver portfor a user-selectable GBIC Transceiver module, plus 4 10/100Mb copper ports. Includes front-panel. 6KP3-G2SC “G+2” module for 6K32TRC Switches, uses one 6K slot and provides one GBIC open transceiver portfor a user-selectable GBIC Transceiver module, plus 2 100Mb 2km FX SC fiber ports. Includes front panel. GBPM-2OTX Two-port Gigabit 6K module for 6K32TRC switches, provides two GBIC open transceiver ports. GBIC-SXSC GBIC transceiver module for use in GBPM-COTX, one SX port with multi-mode SC fiber connector GBIC-LXSC10 GBIC transceiver module for use in GBPM-COTX, one LX port with single-mode SC 10Km Note: Single-mode GBICs are available at 10Km, 25Km, 40Km, and 70Km.

GarrettCom, Inc.

6KP2-2GSX Two-port one-slot Gigabit 6K module for 6K32TRC switches, uses one 6K slot & provides two Gigabit FiberSXSC (1000BASE-SX multi-mode) ports. Includes front-panel sheet metal cover. 47823 Westinghouse DriveFremont, CA 94539PH: (510) 438-9071FAX: (510) 438-9072Email: mktg@garrettcom.comWeb: www.GarrettCom.com
6KP2-2GCU Two-port one-slot Gigabit 6K module for 6K32TRC switches, uses one 6K slot and provides two GigabitCopper (1000BASE-T) auto-negotiating ports. Includes front-panel sheet metal cover. 6KP5-1CU4MT Five-port one-slot Gigabit 6K module for 6K32TRC switches, uses one 6K slot and provides one Gigabit Copper(1000BASE-T) auto-negotiating port and four 100Mb MTRJ Fiber FX multi-mode ports. Includes front panel. 6KP3-1CU2FXT Three-port one-slot Gigabit 6K module for 6K32TRC switches, uses one 6K slot and provides one Gigabit Copper (1000BASE-T) auto-negotiating port and two 100Mb ST Fiber FX multi-mode ports. 6KM-BLNK Blank cover for slot opening in a Magnum 6K32TRC chassis