Text version of the page

))

Flat heaters Assembly F

Universal model for all types of installationsuch as side of tank, bottom of tank with feet or on slidings. Rigid structure ideal forimportant powers.

Assembly type F

on a plastic rod frame ø 20 mm

frame in PP or PVDF This modular assembly type provides a satisfactory installation of the heatersin all situations. The heater is secured on the rod structure by clips which, whenever needed, make the removal of the heating part easier. Please note the reference table of the flat heaters on the next page does not give the overall dimensions of the F range assembly type : 85 mm ±10 mm must be added to each length and width as shown on this picture.
for heaters with reference numbers P30, P40, P90 The choice of N position is available on the full range on either the J (small side) or K (large side) When ordering, state :
the reference number given by the table of dimensions p.11 (1-ph) and p.12 (3-ph)the frame & the support strips materials (standard : PVDF or PP) the N (non heating part) & the C (electric cable) lengths tolerance of ±50 mm the X dimension (height up to the support) the heater positioning : small side J horizontal or large side K horizontal

Options & Accessories

(any other assembly type possible on request)

Extra length of cablesFeet

to go out of the tankin PP or PVDF for installationat the bottom of the tank (standard height100 mm) non heating cable N

Removable guardsCable-gland

electrical cable C ref in PP : PIPP ref in PVDF : PIPF perforated plastic guard in PP or PVDF ref in PP : PRPPP ref in PVDF : PRPPF of type HO5 VV-F or HO7 RN-F ref in PP : PEPP ref in PVDF : PEPF allow between 200 to 300mm extra on the H length (H=installation height on N) Ø75 mm

Frame supports Wedges

frame supports in PP or PVDF to fix on the edge of the tank ref in PP : SUPP ref in PVDF : SUPF wedges for PP or PVDF frame to fix on the edge of the tank ref in PP : CAPP ref in PVDF : CAPF

10