7WD, Visus, MassControl - - Gaiotto Automation - #1

Text version of the page

The glazing Robot working is integrated with three logic operators complete with proper equipments: 7WD® for programming, Visus® and Mass control® for the control. The strenght to the brain Società Certificata ISO 9001 n° LRC160181 Strada Statale 415 km 27 - 26010 Vaiano Cremasco (CR) - Italy Tel. +39.(0)373.279111 - Fax +39.(0)373.279299 e-mail: info@gaiotto.it - e-mail: sales@gaiotto.it - www.gaiotto.it FUNCTIONS FEATURES Drawing arrangement from CAD system and digitizer Graphical and three dimensional visualization of the piece Graphical representation of the robot trajectories Graphical simulation of the robot trajectories Graphical simulation of the glaze thickness Programs generation for Gaiotto glazing robot Programs transferring by serial port or floppy disk Windows working platform with the following features: �¡ Intel Pentium 4 processor 1,8 GHz �¡ RAM 512 Mb �¡ Graphical card 3 D 128 Mb �¡ Hard disk 40 Gb �¡ Working system Windows 2000 Icons graphical interface OUTFITS Industrial PC: �¡ Passive backplane �¡ 1 parallel door, up to 4 serials 422 �¡ Drive door 3,5”, HD 2Gb �¡ Board with Pentium processor �¡ 16 Mb RAM �¡ 17”monitor Visus system: �¡ Up to 4 linear CCD with 256 grey tones, 1728 pixel resolution and lens Cmount with focals from 2,6 up to 12 mm or �¡ Up to 4 CCD with 256 grey tones with resolution of 752 x 582 pixel, acquisition speed from 1/125 up to 1/10.000 of sec. and lens with connection of 35 mm and focals from 28 up to 200 mm FUNCTIONS OUTFITS FEATURES Operator interface with graphical display Electropneumatic regulation of the pressure 0-10 bar by a valve with proportional management Differential alarm warnings with minimum values of 1 gr Management up to 8 different products/colours Multilanguages software Delivery measurement sensor as per Coriolis principle Serial communication card Rs 485 Delivery measurement precision +/- 2 gr Speed control: 50 measures/ sec Spraying control up to 10.000 gr/min