Solus Pullkey : Mine Stopping/Signalling Switch - GAI-Tronics - #1

Text version of the page

A4 C1000 Brochure table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:9.00pt "Arial", sans-serif; } .font1 { font:11.00pt "Arial", sans-serif; } • Polycarbonate Construction (hard wearing, non-rusting, lightweight) • Unique spring-operated cam lockout mechanism. • OEM & Specialised versions available. • Latching & non-latching versions. • Grease-packed pull rope sliders • Water & dust sealed to IP65 SOLUS pull keys provide stopping and signalling facilities on stage loaders, afcs, haulages and roadway conveyors with a variety of GAI-Tronics and other approved manufacturers' control circuits. Their remarkably low weight combines with their unique resistance to corrosion and impact damage to provide unsurpassed reliability in operation and convenience in installation and maintenance. As a users option, SOLUS pull keys can be supplied with: • Latching or non-latching lockout mechanism • Sealed or unsealed microswitches with gold plated contacts • An independent signal button The case and cover are precision-moulded from flame-retardant polycarbonate and the interior is of two-part construction to provide isolation between the mechanical, the electrical/termination sections. The pull mechanism is mild steel, zinc-plated and passivated, and grease-packed for additional protection. The pull ropes and all external screws are stainless steel. The cover is secured by four M6 hexagon-head captive screws. 'Cat's Eye' type reflectors in the end of the Lockout/Reset switch are visible along the roadway when the switch is in 'Lockout' position. A slotted mounting hole, 21x11mm, is provided at each end of the unit.