VoIP Speaker Amplifier Assemblies - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

VoIP and WiFi Speaker Amplifier Assemblies Model 10370-x01 and 10370-x02 Wired or WiFi VoIP One-way broadcasting from IP network Weatherproof enclosure Direct 120/240 V ac input power or PoE 30-watt speaker amplifier (into an 8-ohm speaker load) 10370-x01 series with 120/240 V ac input 24-watt, 70.7V or 100V audio output, 10370-x02 series with 120/240 V ac input 600-ohm audio output (all models) Two programmable dry contact closure outputs SIP compatible (RFC3261) Real-time alarm reporting via email, Syslog, or TMA software Configurable via web page, serial link or download Multicast capability, up to eight addresses GAI-Tronics Model 10370-70x series VoIP Speaker Amplifier Assemblies enable broadcasting to personnel throughout a facility or area over an existing VoIP network via an external speaker(s) or connection to a central amplifier speaker system. The Model 10370-80x series VoIP WiFi Speaker Amplifier Assemblies provide the same capability as the Model 10370-70x series but allow connection to an existing wireless network. The amplifier assemblies can easily be added to an existing network (10/100 baseT Ethernet) or wireless network (IEEE 802.11 b/g) with minimal cost or effort. The -701 and -801 series speaker amplifiers include an integrated speaker amplifier circuit that can supply up to 30 watts of output power to an 8-ohm speaker or combination of speakers equaling 8 ohms. The ability to utilize any speaker or horn/driver combination permits selection of speakers that meet the coverage and environmental requirements of a specific area. The -702 and -802 series amplifiers also include an integrated speaker amplifier circuit but will instead provide a 70.7 V or 100 V, 25-watt output, eliminating the need for a separate central amplifier for smaller system applications. For additional design flexibility, each amplifier assembly also includes a 600-ohm, 0 dBm audio output. This output can be connected to the audio input of a larger central amplifier or any broadcast equipment that requires a 600ohm audio input. Each VoIP or VoIP WiFi Speaker Amplifier is capable of providing two dry contact, type A (normally open) outputs. Each output is programmable for a variety of uses such as activation of a strobe in a high noise area or initiating a door latch remotely.

 Open the catalogue to page 1

VoIP and WiFi Speaker Amplifier Assemblies Model 10370-x01 and 10370-x02 Performance Specifications POWER OPTIONS AC Power Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 120/240 V ac, 50/60 Hz Input Current . . . . . . . . . . . . . . 0.35 A @ 120 V ac, 0.2 A @ 240 V ac Power Over Ethernet (PoE), -701 and -702 models only Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802.3af compliant (via RJ45) AUDIO Output Speaker Output Power With PoE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 W into 8-ohm load, or 6 W into 70.7 V/100 V system With120/240...

 Open the catalogue to page 2

All GAI-Tronics a division of Hubbell Ltd catalogues and technical brochures

  1. Help Point VR

    2 Pages

    En
  2. Hood 16dB

    1 Pages

    En
  3. Hood 23dB

    2 Pages

    En
  4. RigCom

    2 Pages

    En
  5. Sentinel

    2 Pages

    En
  6. Sounder Ex

    2 Pages

    En
  7. Titan Telephone

    2 Pages

    En
  8. VR Help Point

    2 Pages

    En
  9. VoIP Clean phone

    2 Pages

    En
  10. Help Points

    2 Pages

    En
  11. Elemecplus

    5 Pages

    En
  12. VoIP Auteldac 4

    2 Pages

    En
  13. Hood: 23dB

    2 Pages

    En
  14. Hood Post

    1 Pages

    En
  15. Accessories

    2 Pages

    En
  16. Ex Sounder

    2 Pages

    En
  17. Hood 9dB

    1 Pages

    En
  18. Titan For Rail

    2 Pages

    En
  19. Sonic Alarm

    4 Pages

    En
  20. PullSwitch

    1 Pages

    En