CS-4001PM/127 - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

CS – 4001PM Capacity Test System During load tests of batteries, such as capacity tests, cell/block voltage values may change rapidly. This is the case for example at the start (voltage sag) and at the end of a discharge. CS-4001PM is a multi-channel test system, which can be connected to each cell/block. Furthermore it is possible to measure the battery’s total voltage and the load current. The complete measuring points are automatically recorded within a couple of seconds. Capacity and load tests become more accurate, efficient and safer as when using manual systems. Especially the safety of the test personal becomes an issue during discharge tests. The use of CS-4001PM enables the test personal to keep a sufficient safety distance to the battery while testing. Most of the mechanical contacts like relays have been replaced with semiconductor switches.

 Open the catalogue to page 1

User Interface integrated USB-interface. An auxiliary serial interface is also established (for electronic load control, etc.). Technical Data Application environment: The instrument is intended to be used in industrial environment The above specifications are valid at nominal input voltage and an ambient temperature of Specifications are subject to change without ■ TMC-MANAGER Software (download) Example: Graphical Analysis Ivlin. Meas. point: Optional Accessories ■ Multi cable MKB-16/250 with 16 measuring ■ Electronic probe for spec. Gravity www. batte ry-testi ng.com

 Open the catalogue to page 2

All G. Jost - electronic catalogues and technical brochures

  1. CS - 3001

    11 Pages

    En
  2. TMC - 2001d

    50 Pages

    En
  3. CRM and DMA35

    1 Pages

    En
  4. CRM-2010

    2 Pages

    En
  5. TMC-2001E

    2 Pages

    En
  6. CM-9010

    1 Pages

    En
  7. TMC-2001RT

    2 Pages

    En