CRM and DMA35 - 1 Pages

  1. P. 1

Catalogue excerpts

CELLIZER-SYSTEMS DMA35 – Adapter - A3 The measurement devices TMC-2001E and CRM-2010 are able to read out the density sensor DMA35. The data transfer is established via an infrared link (IRDA) between the adapter-box and the DMA35. Please have a look at the following picture: There’s a direct link between the LEDs. (Distance: 15-30cm) HOW-TO: 1) Please connect the measurement device with the DMA-adapter first. Use cable-„2“, the green LED „1“ must start blinking (adapter is now powered on). 2) Select the desired function, f. e. START MEASUREMENT->DMA DENSITY Please make all necessary inputs and perform START MEASUREMENT. 3) Now the stored data in the DMA35 must be printed out. Please select Menu -> Measuring Data -> Export -> Print All The yellow LED „3“ is blinking during the data transfer. 4) After data transmission you must remove cable „2“ to switch off the DMAadapter. G. Jost – electronic Larstrasse 55 53844 Troisdorf

 Open the catalogue to page 1

All G. Jost - electronic catalogues and technical brochures

  1. CS - 3001

    11 Pages

    En
  2. TMC - 2001d

    50 Pages

    En
  3. CRM-2010

    2 Pages

    En
  4. TMC-2001E

    2 Pages

    En
  5. CS-4001PM/127

    2 Pages

    En
  6. CM-9010

    1 Pages

    En
  7. TMC-2001RT

    2 Pages

    En