| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | dated Instruments | | |
| | | Celsis (°C)=(°F-32)/1.8 | | | 1 Hz=1 cycle/sec | | |
| | | |
| | | |
| | | New Model Old Model | | Description | | |
| | | |
| | | |
| | | | | | | | | | CSG100 Series | JM Series | | | | | JM-2A Standard. Mounting JM-2AB OEM version. JM-2A board only | | | | | | | | | |
| | | Inline DC Power Signal Conditioner, Amplifier Voltage & Current | | • Dimensions: 3.1"H x 1.7"W x 0.8"D • Weight: 2 oz (56.7 g) • CSG110 with Din Rail Option • CSG100 board only | | |
| | | |
| | | ■ Power supply: 12 - 24 VDC 1 Jumper selectable bridge excitation of 5 or 10 VDC @ 30 mA (factory default) Jumper selectable for sensor output range of 0.5 - 4 mV/V ■ Output: ±10 VDC @ ±2 mV/V (factory default) or 4 - 20 mA @ ±2 mV/V ■ Built in 60.4Kn Shunt Cal w/ External Button | | Plastic housing with mating DB9 Female connector for power output side and DB9 Male connector for sensor side Frequency response: 2 pole filter, 1K Hz (factory standard. Lower or higher frequency response available up to 10K Hz) Span range: ±10%. Zero range: ±30% of output Operating temperature: 32 to 158°F (0 to 70°C) | | |
| | | |
| | | Includes 10 ft cable w/ DB9 Female for power side Bench Top Rotary Torque & Angle Digital Display | | |
| | | |
| | | |
| | | | | | | | | | IBT100 | NEW PRODUCT | | | | | | | | | IBT500 | NEW PRODUCT | | | | | | | | | IHH300 | D531 | | | | V | HÈSÈ | | | | IPM500 | D500 Series | | | | & | D501 standard unit D502 w/ analog output, alarm, RS232 D503 w/ analog output, alarm, RS485 D504 w/ analog output, 0-10 Vdc, 0-20 mA D505 w/ dual set-point alarm | | | | | | | | | |
| | | |
| | | 4x20 menu driven display High accuracy and scan rate Memory for 2000 measured values 1 Peak/Valley capture mode. Software and Hardware triggers ■ Digital LP filtering | | • RS232 / Ethernet Communications • Scaled Analog Outputs • Measuring Rate <= 10Khz • Accuracy < 0.1% Full Scale • Working Temperature 32 to 140F (0 to 60 °C) | | |
| | | • Input Power 115 VAC, 230 VAC, 50-60 Hz • Input Range 0.5 mV To 3.5 mV, 4 or 6 Wire • Weight 4.4 lbs | | |
| | | |
| | | |
| | | |
| | | Bench Top Signal Conditioner w/ • Power supply: 9 - 37 VDC • • 60 Conversions per second • • Scalable to 5 digits: ±99,999 • 10 VDC @ 120 mA Excitation to power sensors • optional (5 VDC @ 50 mA) • Front Push Button Tare and Shunt Cal • • Shunt Cal resistor for calibration | | Digital Display DB9 Female connector for sensor DB9 Male connector for Analog Output 0 to 10 VDC or 0 to 20 mA DB9 Male connector for dual setpoint controller (alarm) w/2 form C contact relays: 5 Amp Max DB9 Male connector for RS232 RS232 Baud rates from 300 to 19,200 channels | | |
| | | ■ Operating Temperature: 32-130°F (0 to 55°C) ■ Storage Temperature: -40 to 150°F (-40 to 65°C) • Relative Humidity: 90% at 100°F (38°C) Options: 4 sensor connections 110-220 VAC 30 W 50-60 Hz Power Supply ■ Dimensions: 6.3"W x 3.4"H x 6.4"D • Weight: 1.75 lb (0.8 Kg) Gage Devices) Dimensions: 3.3"W x 7.3"H x 1.3"D Weight: 8 oz (0.23 Kg) | | |
| | | |
| | | Hand Held Portable Signal Conditioner w/ Digital Display (for Strain | | |
| | | |
| | | Power: 9 Volt recharagable battery (supplied) Battery life of up to 20 hrs. Supplied with charging adapter (110 Volt input) 1 Fast Response: 8000 samples per second ■ Scalable to ±9,999 resolution, w/ floating decimal point ■ 5 selectable filter settings 170, 250, 500, 1500, 3600 Hz | | ■ RS232C connection (supplied w/ cable and connector Accepts plug and play with smart chip sensors Display can store 15 different sensor calibrations ■ Operating Temperature: 32-105°F (0 to 41°C) ■ Storage Temperature: 32-105°F (0 to 41°C) ■ Relative Humidity: 0/95° non-condensing | | |
| | | |
| | | |
| | | |
| | | Panel Mount Signal Conditioner w/ Digital Display | | |
| | | |
| | | Power supply: 85 to 264 VAC standard (9 to 37 VDC optional) Scalable to ±99,999 resolution 1 60 conversions per second ■ Bridge excitation: 10 VDC @ 120 mA max (factory default), 5 VDC @ 50 mA 1 Peak hold, recall and Remote Auto Tare, NEMA 4 front panel | | • Plug-in screw terminals for all connections • Drives up to 4 sensors 350fi (min.) full bridge • Panel or table mountable plastic case • Not recommended for dynamic or rotary torque application | | • Dimensions: (1.89"H x 3.78"W x 5"D) • Recommended panel cutout: 3.622" x 1.772" • Weight: 16 oz (0.45 Kg) with all options • All models available with 9 to 37 VDC power option • Interface software available | | |
| | | |
| | | |
| | | |
| | | |
| | | Color LCD Touch Panel Signal Conditioner w/ Digital Display | |
| | | |
| | | ■ 3.5" Color Touch Panel LCD w/ 320X120 * resolution ■ Scalable to 5 digits: ±99,999 * 1 2000 conversions per second * 1 Graphing Function ■ 9 to 37 VDC DC option * ■ Signal Input Range: ±3.0 mV/V * | | Sensor excitation: 2.5 VDC, 5 VDC, 10 VDC @ 120 mA Dual setpoint controller (Alarm) Hold Functions: Sample, Peak, Valley, Peak-to-peak, Relative max and min, and Inflection hold Plug-in screw terminal Operating Temperature: 14-104°F (-10 to 40°C) | | |
| | | • Relative Humidity: 80% RH or below • Optional analog output ±5 VDC (4 to 20 mA) w/ DC power supply (Model D612) • Dimensions: 3.59"H x 3.59"W x 4.74"D • Weight: 2.1 lb (0.95 Kg) | | |
| | | |
| | | |
| | | |
| | | • Additional features for troubleshooting strain-gaged sensors, and for the revalidation of overloaded sensors • Multi-component sensor testing with crosstalk check capability • Automated or manual test input • Hardware & Software included, except PC • Supports IEEE 1451.4 standard (TEDS) | | |
| | | 1 Internal memory capability, customizable per user application 1 Internet capability via PC, allows remote management 1 Test data can be saved in the VCalTM module or directly onto PC 1 User-friendly software and system environment, requires no outside training | | |
| | | • Supports ISO9000-2000, ISO17025, E74, E4, Z540 & Other Standards • Automated or manual reference calibration • Built-in Conversion Calculators • Sensor auto recognition capability • Supports sensors with mV/VDC or mA outputs • Built-in Shunt Cal measurement with scaling for each input channel. Supports external Shunt Cal resistor | | |
| | | |
| | | |
| | | |
| | | |4 Channel Summing Junction Box Dip switch selectable channels (2 to 4) 94V-2 Polycarbonate Enclosure NEMA 4 rating Amplified Version (±10 VDC, 4-20 mA) optional Dimensions: 2"H x 7.75"W x 5"D Weight: 1 lb | | |
| | | Enclosure • Futek can provide a complete system integration that includes multiple sensors and industrial displays, custom enclosure and system calibration • Customizable enclosures available for your unique applications Contact factory | | |
| | | IAC200 | | | ENCLOSURE | | |
| | | | |
| | | |
| | | |
| | | Shunt Cal Resistor (1/4 Watt, 10 PPM/°C) | | | | | | & Retractile Cord Available (see page 2) TEDS Option Available IPM=Panel Mount IBT=Bench Top | | |
| | | |
| | | |
| | | |
| | | CSG=Signal Conditioner | | |
| | | |
| | | Futek Assists You in Complete System Integration | | |
| | | |
| | | 17 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |